Hello, the dslogic driver should work with parameter "--continuous". Unfortunately, I do not receive any UART data.
My call is: SIGROK_FIRMWARE_DIR=/usr/local/share/sigrok-firmware/dslogic_firmware ./sigrok-cli --driver dreamsourcelab-dslogic --config samplerate=2000k:voltage_threshold=1.5-1.5 --continuous -P uart:baudrate=9600 -B uart=rx The LED color changes from red to green flash Even after ten minutes no change. Nothing is spent! A Logic16 clone will deliver at the same circuit with call ./sigrok-cli --driver saleae-logic16 --config samplerate=2000k --continuous -P uart:baudrate=9600 -B uart=rx correct Ascii data. Jörg ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ sigrok-devel mailing list sigrok-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sigrok-devel