Hello,
Ok, great - I’ll give it a try!
Regards,
Staffan
On Wednesday, June 27, 2018, Soeren Apel <soe...@apelpie.net> wrote:
> Hello,
>
> > Hopefully I'm missing something obvious...
> > I have decoded some data that was captured with a logic analyzer and
> > now I would like to save only the decoded data (as seen in Pulseview)
> > to a file. Is there any simple way of doing this?
>
> Currently, no. That's still on the to-do list.
>
>
> > I have a dump of an EPROM readout and the decoder does a great job
> > turning bits into address and data. Storing that as raw binary
> > wouldn't be ideal since I would like to have the decoded data...
>
> You can use sigrok-cli for that - I have in the past, so I know it
> works. You can save the .sr file in PV and the decode using sigrok-cli.
> The -B parameter is your friend :)
>
> All the best,
> -Soeren
>
>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
sigrok-devel mailing list
sigrok-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sigrok-devel
