On Mittwoch, 7. November 2018 22:35:16 CET Guido Trentalancia wrote: > Update the default serial port options for Rohde&Schwarz and > Hameg mixed-signal oscilloscope devices connected through USB. > > Also, remove misplaced and unused serial port configuration > option from the hameg-hmo driver. > > This patch complements the following commit: > > fa3d104f17966dd66664f5ee1cccd05856a7e312 > > in terms of updating the USB PIDs for new devices (HMO series). > > However, in order to make full use of such default serial > port options for USB connections and to avoid data corruption > or even worse connection problems, the following patch is also > required: > > Use appropriate default serial port options for USB connections > > This second version (v2) of the patch simply fixes a comment > describing the device models. >
Can you please verify your changes are correct? The 0x0118 ID is used by the HMO1002, which was never distributed under the Hameg brand. The other two IDs are not tied to specific devices, but to the HO720/HO730 interface boards. These can be used with devices from the HMO, HMS(-X) and HMF/HMP series. Regards, Stefan _______________________________________________ sigrok-devel mailing list sigrok-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sigrok-devel
