On Fri, Aug 2, 2019 at 6:58 AM Gerhard Sittig <gerhard.sit...@gmx.net> wrote:
> > sr: serial-libsp: Attempt to open serial port with invalid parameters. > > This strongly suggests that you lack support for serial > communication over Bluetooth. Most probably due to not providing > the optional dependencies which enable this feature. > Well, I did try to enable all the serial switches in libsigrok and libserialport. > To eliminate some potential local issue in your setup: Does the > AppImage work for you? See the sigrok.org Download area. If it > does, do check how your local setup differs from mainline build. > It works! (with Debian 10 buster): $ ./sigrok-cli-NIGHTLY-x86_64.AppImage -d eevblog-121gw:conn=bt/ble122/88-6B-0F-81-E1-1F --scan The following devices were found: eevblog-121gw - EEVblog 121GW with 3 channels: main sub bar However PulseView-NIGHTLY-x86_64.AppImage didn't show anything but I guess I should fix the other problems first. So the problem is within libsigrok? This check seems I have enabled the serial: $ grep SERIAL libsigrok/config.h #define CONF_LIBSERIALPORT_VERSION "0.1.1" #define HAVE_HW_SERIAL_DMM 1 #define HAVE_HW_SERIAL_LCR 1 #define HAVE_LIBSERIALPORT 1 #define HAVE_SERIAL_COMM 1 Here is a check of the difference: $ diff <(./sigrok-cli --version) <(./sigrok-cli-NIGHTLY-x86_64.AppImage --version) 4c4 < - libsigrok 0.6.0-git-80d34975/4:0:0 (rt: 0.6.0-git-4d8338bb/4:0:0). --- > - libsigrok 0.6.0-git-6c6dd73/4:0:0 (rt: 0.6.0-git-6c6dd73/4:0:0). 6,7c6,7 < - glib 2.58.3 (rt: 2.58.3/5803:3) < - libzip 1.5.1 --- > - glib 2.40.2 (rt: 2.58.3/5803:3) > - libzip 0.10.1 9,10c9,13 < - libusb-1.0 1.0.22.11312 API 0x01000106 < - Host: x86_64-pc-linux-gnu, little-endian. --- > - libusb-1.0 1.0.22.11312 API 0x01000102 > - hidapi 0.8.0-rc1 > - bluez 4.101 > - libftdi 1.2 > - Host: x86_64-unknown-linux-gnu, little-endian. 12c15 < - libsigrokdecode 0.6.0-git-e64a972/4:0:0 (rt: 0.6.0-git-e64a972/4:0:0). --- > - libsigrokdecode 0.6.0-git-dcf1b50/4:0:0 (rt: 0.6.0-git-dcf1b50/4:0:0). 14,16c17,19 < - glib 2.58.3 (rt: 2.58.3/5803:3) < - Python 3.7.3 / 0x30703f0 (API 1013, ABI 3) < - Host: x86_64-pc-linux-gnu, little-endian. --- > - glib 2.40.2 (rt: 2.58.3/5803:3) > - Python 3.4.3 / 0x30403f0 (API 1013, ABI 3) > - Host: x86_64-unknown-linux-gnu, little-endian. Is it "bluez" which is missing or where should I start? best regards
_______________________________________________ sigrok-devel mailing list sigrok-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sigrok-devel
