Hi, thanks for the information. I think I got now how that works in pulseview /sigrok:) My device supports that, but I have to implement the config_* functions to let pulseview know that it can do it. Thanks a lot!
Fabian Am 13.01.20 um 19:22 schrieb Soeren Apel: > Hello Fabian, > > >> sigrok-cli is detecting my device just fine. However, Pulseview is >> not. >> I'd like to know why. > > That's because PV only shows devices with a device capability of a > logic analyzer or an oscilloscope as is the case with e.g. demo: > > https://sigrok.org/gitweb/?p=libsigrok.git;a=blob;f=src/hardware/demo/api.c;h=3b77d40cdd36bf3f127c6bd90ef132f56204b050;hb=HEAD#l56 > > I'm assuming this isn't the case for your device driver. > > All the best, > -Soeren > > > > >> Do I have to do anything with Pulseview in terms of editing the code? >> I >> could not find any reference to known/working drivers/devices in the >> source code. Although I noticed that Pulseview lists only a small >> number >> of sigrok supported devices in the connect window. >> What am I missing? >> >> Best regards, >> Fabian >> >> >> >> _______________________________________________ >> sigrok-devel mailing list >> sigrok-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/sigrok-devel > _______________________________________________ sigrok-devel mailing list sigrok-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sigrok-devel
