I asked exactly the same question a few weeks back. I may cite Soeren: That's because PV only shows devices with a device capability of a logic analyzer or an oscilloscope as is the case with e.g. demo:
https://sigrok.org/gitweb/?p=libsigrok.git;a=blob;f=src/hardware/demo/api.c;h=3b77d40cdd36bf3f127c6bd90ef132f56204b050;hb=HEAD#l56 I'm assuming this isn't the case for your device driver. All the best, -Soeren Am 27.02.20 um 17:33 schrieb Inessa Kavalenka: > Hi everyone! > > I am trying to use sigrok with my own device. I added corresponding > "api" and "protocol" code, and my device is recognized with sigrok-cli > (libsigrok$ sigrok-cli -d mydevice --scan -l 5). But when I run > PulseView -> "connect to device", my device is not listed in the driver > combobox. I also noticed that *sigrok-cli -L* lists a lot of drivers, > but only a few of them are available from PulseView GUI. Why is that? > How do I add my driver to PulseView ? > > Thank you! > > > > > > _______________________________________________ > sigrok-devel mailing list > sigrok-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/sigrok-devel > _______________________________________________ sigrok-devel mailing list sigrok-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sigrok-devel
