Hi,
back then I wrote this:
My device supports that, but I have to implement the config_* functions
to let pulseview know that it can do it.
If I remember correctly, there is some sort of script to generate a
default driver. That was ver helpful.
Best regards,
Fabian
Am 27.02.20 um 18:52 schrieb Inessa Kavalenka:
> Hi Fabian!
>
> My device *is *a logic analyzer. I wrote in src/hardware/mydevice/api.c :
>
> static const uint32_t scanopts[] = {
> SR_CONF_NUM_LOGIC_CHANNELS,
> };
>
> static const uint32_t drvopts[] = {
> SR_CONF_LOGIC_ANALYZER,
> };
>
> How can I make PV recognize it? Maybe I need to declare the LA capabilities
> somewhere else too?
>
>
> чт, 27 февр. 2020 г. в 20:47, Inessa Kavalenka <[email protected]
> <mailto:[email protected]>>:
>
> Hi Fabian!
>
> My device *is *a logic analyzer. I wrote in
> src/hardware/mydevice/api.c :
>
> static const uint32_t scanopts[] = {
> SR_CONF_NUM_LOGIC_CHANNELS,
> };
>
> static const uint32_t drvopts[] = {
> SR_CONF_LOGIC_ANALYZER,
> };
>
> How can I make PV recognize it? Maybe I need to declare the LA
> capabilities somewhere else too?
>
>
> чт, 27 февр. 2020 г. в 20:30, Fabian Schwartau <[email protected]
> <mailto:[email protected]>>:
>
> I asked exactly the same question a few weeks back. I may cite
> Soeren:
>
> That's because PV only shows devices with a device capability of a
> logic analyzer or an oscilloscope as is the case with e.g. demo:
>
>
> https://sigrok.org/gitweb/?p=libsigrok.git;a=blob;f=src/hardware/demo/api.c;h=3b77d40cdd36bf3f127c6bd90ef132f56204b050;hb=HEAD#l56
>
> I'm assuming this isn't the case for your device driver.
>
> All the best,
> -Soeren
>
> Am 27.02.20 um 17:33 schrieb Inessa Kavalenka:
> > Hi everyone!
> >
> > I am trying to use sigrok with my own device. I added
> corresponding
> > "api" and "protocol" code, and my device is recognized with
> sigrok-cli
> > (libsigrok$ sigrok-cli -d mydevice --scan -l 5). But when I run
> > PulseView -> "connect to device", my device is not listed in
> the driver
> > combobox. I also noticed that *sigrok-cli -L* lists a lot of
> drivers,
> > but only a few of them are available from PulseView GUI. Why
> is that?
> > How do I add my driver to PulseView ?
> >
> > Thank you!
> >
> >
> >
> >
> >
> > _______________________________________________
> > sigrok-devel mailing list
> > [email protected]
> <mailto:[email protected]>
> > https://lists.sourceforge.net/lists/listinfo/sigrok-devel
> >
>
>
>
> _______________________________________________
> sigrok-devel mailing list
> [email protected]
> <mailto:[email protected]>
> https://lists.sourceforge.net/lists/listinfo/sigrok-devel
>
>
>
> --
> С уважением,
> Инесса
>
>
>
> --
> С уважением,
> Инесса
>
>
> _______________________________________________
> sigrok-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/sigrok-devel
>
_______________________________________________
sigrok-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sigrok-devel
