Hello Phill, PulseView only supports logic analyzers and oscilloscopes at this time, which is why other drivers are filtered out as you noticed.
If you want to use a DMM with a graphical interface, I suggest using either https://sigrok.org/wiki/Sigrok-meter or https://sigrok.org/wiki/SmuView -Soeren On Thu, 2020-05-21 at 17:39 +0100, TechColab Limited wrote: > Hi, apologies for noobie Q but couldn't find it on the web site. > I have a VA18B which I've modded to use a PL2303 TA USB to TTL RS232 > Serial Adapter. > It works fine using the software from > https://www.franksteinberg.de/VA18B.htm but I'd like to use > PulseView. > I've looked through the PulseView "Connect to Device" dialogue -> > "Step 1: Choose the driver" drop-down list. > But I cannot find anything which seems to match VA18B or any of the > clone names I've seen. > I gave every one of them a try with the "Scan for devices using > driver above" but no luck. > The VA18B has a nice green tick in the hardware compatibility list, > so what am I doing wrong? > Thanks in advance, > Phill > > _______________________________________________ > sigrok-devel mailing list > sigrok-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/sigrok-devel _______________________________________________ sigrok-devel mailing list sigrok-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sigrok-devel
