I was testing new driver for electronic loads and noticed odd behavior with sigrok-cli.
Output seems fine without "-O csv": # ./sigrok-cli -d itech-it8500:conn=/dev/ttyUSB1:serialcomm=38400/8n1 --samples 4 FRAME-BEGIN V1: 12.01100 V DC I1: 499.60 mA DC P1: 6.00000 W DC FRAME-END FRAME-BEGIN V1: 12.01100 V DC I1: 499.60 mA DC P1: 6.00000 W DC FRAME-END FRAME-BEGIN V1: 12.01100 V DC I1: 499.50 mA DC P1: 5.99900 W DC FRAME-END FRAME-BEGIN V1: 12.01100 V DC I1: 499.50 mA DC P1: 5.99900 W DC FRAME-END But CSV output seems messed up: # ./sigrok-cli -d itech-it8500:conn=/dev/ttyUSB1:serialcomm=38400/8n1 --samples 4 -O csv ; CSV generated by libsigrok 0.6.0-git-7e46c8ec ; from ITECH IT8500 series on Sat May 30 00:48:31 2020 ; Channels (3/3): V1, I1, P1 ; Samplerate: 10 Hz V1: 12.01000 V DC I1: 499.50 mA DC V DC,A DC,W DC 12.01,0.4995,5.999 FRAME-END V1: 12.01000 V DC I1: 499.50 mA DC 12.01,0.4995,5.999 FRAME-END V1: 12.01000 V DC I1: 499.50 mA DC 12.01,0.4995,5.999 FRAME-END V1: 12.01000 V DC I1: 499.50 mA DC 12.01,0.4995,5.999 FRAME-END Is this perhaps something in sigrok-cli, or could it be the driver somehow? -- Timo <t...@iki.fi>
_______________________________________________ sigrok-devel mailing list sigrok-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sigrok-devel
