I started "sigrok-cli -L -l5 > sigrok-cli.log 2>&1". The output is attached, but there is no VID/PID info in the log.
-----Original Message----- From: Paul Fertser [mailto:fercer...@gmail.com] Sent: Sunday, October 18, 2020 10:22 AM To: Helge Kruse Cc: sigrok-devel@lists.sourceforge.net Subject: Re: [sigrok-devel] Getting firmware for Kingston LA2016 On Sun, Oct 18, 2020 at 10:17:46AM +0200, Helge Kruse wrote: > Thanks for the input. I have installed WinUSB (v6.1.7600.16385) for the > device "Unknown Device #1" using Zadig. This didn't change the list > "Supported hardware drivers" in the output of "sigrok-cli -L". I suggest you enable more debug and send the resulting log. It should be visible what VID/PIDs are getting considered and why they're getting ignored. -- Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software! mailto:fercer...@gmail.com
sigrok-cli.log
Description: Binary data
_______________________________________________ sigrok-devel mailing list sigrok-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sigrok-devel
