Which variant of the "cheap chinese" logic analysers do you have? There
are several variants and although they are similar, they are not all
quite the same. Sigrok.org has several examples and information on
whether they are supported or not and which driver is required, but
unfortunately it has been down since at least Saturday so I can't
provide you a link at the moment.
It could be driver related or even a hardware fault. Mine is rated up to
24MHz and easily does 4MHz or 10MHz so yours should be able to do the
same. How many samples to capture are you setting?
John.
On 08/02/2022 12:38, landro...@volloeko.de wrote:
Hi,
I am new to PulseView and am using a cheap chinese 24MHz logic analyzer.
Whenever I set the sampling rate to above 500kHz no data is shown in the plot.
Is this analyzer related or configuration related?
Happy to hear what I'm doing wrong ;-)
Bob
_______________________________________________
sigrok-devel mailing list
sigrok-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sigrok-devel
--
John.
_______________________________________________
sigrok-devel mailing list
sigrok-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sigrok-devel
