I have been using Pulseview on W10 on an old laptop PC for years with no
problems through many Windows updates. My 16 channel logic analyser is a
home brew device using a Chinese clone of a Cypress USB dev board. I
believe most of the cheap LAs use the same device.
I'll go switch the machine on later, and see which driver I am using.

Tony


On Sun, 16 Feb 2025, 02:24 Dave, <softf...@hotmail.com> wrote:

> I have pulseview working on WIN7 64 using an 8 bit SALAE device.
>
> I need to migrate to WIN10 but ...
>
> I can use zadig to install the driver OK and zadig works fine for other
> USB devices, and the device appears in the USB tree as OK.
>
> When I run pulseview it insists on running the demo device and I cannot
> select the device in the pull down menu.
>
> I have tried the 64bit nightly builds, an older version of the nightly
> build, and 0.4.3
>
> Is there a known problem with WIN10? is there any way around it?
>
> Any advice welcome,
> Dave
>
>
>
>
> _______________________________________________
> sigrok-devel mailing list
> sigrok-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/sigrok-devel
>
_______________________________________________
sigrok-devel mailing list
sigrok-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sigrok-devel

Reply via email to