The laptop has a Pentium CPU P6200 2 cores @ 2.13GHz with 4GB x64-based processor (note - not supported by W11). PulseView is 0.5.0-git-7e5c839, and sigrok is in C:\Program Files (x86)\sigrok. 51.4MB 29 Oct 2020 Don't forget you have to have Python installed to enable any decoders. I connect to the device with fx2lafw (generic driver for FX2 based LAs) via USB. 'About' in PulseView:
Versions, libraries and features: PulseView 0.4.2 Qt 5.7.1 glibmm 2.42.0 Boost 1_60 libsigrok 0.5.2/5:1:1 (rt: 0.5.2/5:1:1) - glib 2.44.1 (rt: 2.44.1/4401:1) - libzip 1.5.1 - libserialport 0.1.1/1:0:1 (rt: 0.1.1/1:0:1) - libusb-1.0 1.0.20.11003-rc3 API 0x01000104 - hidapi 0.8.0-rc1 - libftdi 1.4 - Host x86_64-w64-mingw32.static.posix, little-endian - SCPI backends TCP, serial, USBTMC libsigrokdecode 0.5.3/6:1:2 (rt: 0.5.3/6:1:2) - glib 2.44.1 (rt: 2.44.1/4401:1) - Python 3.4.4 / 0x30404f0 (API 1013, ABI 3) - Host x86_64-w64-mingw32.static.posix, little-endian Hope this helps Tony On Sun, 16 Feb 2025 at 13:27, Dave <softf...@hotmail.com> wrote: > Interesting, which version of Pulseview are you using>> > and Win10 x32 or x64 ?? > > Dave > > > On 16/02/2025 08:24, Tony Abbey wrote: > > I have been using Pulseview on W10 on an old laptop PC for years with no > problems through many Windows updates. My 16 channel logic analyser is a > home brew device using a Chinese clone of a Cypress USB dev board. I > believe most of the cheap LAs use the same device. > I'll go switch the machine on later, and see which driver I am using. > > Tony > > > On Sun, 16 Feb 2025, 02:24 Dave, <softf...@hotmail.com> wrote: > >> I have pulseview working on WIN7 64 using an 8 bit SALAE device. >> >> I need to migrate to WIN10 but ... >> >> I can use zadig to install the driver OK and zadig works fine for other >> USB devices, and the device appears in the USB tree as OK. >> >> When I run pulseview it insists on running the demo device and I cannot >> select the device in the pull down menu. >> >> I have tried the 64bit nightly builds, an older version of the nightly >> build, and 0.4.3 >> >> Is there a known problem with WIN10? is there any way around it? >> >> Any advice welcome, >> Dave >> >> >> >> >> _______________________________________________ >> sigrok-devel mailing list >> sigrok-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/sigrok-devel >> >
_______________________________________________ sigrok-devel mailing list sigrok-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sigrok-devel