Hello all,
I’ve been experimenting with a UNI-T UT612 LCR meter that uses the
CP2110 HID-UART bridge (USB VID:PID 10c4:ea80). I’ve built libsigrok and
sigrok-cli from current master, with HIDAPI detected at configure time.
However, sigrok-cli --scan only shows the demo device, and the
uni-t-ut612 driver appears to expect a serial port (/dev/ttyUSB*).
Could someone clarify the current status of HID support for the UT612?
• Has HID binding for the UT612 driver been merged, or is it still pending?
• Is there a development branch or patchset I should test?
• Any guidance on decoding the HID frames directly would also be
appreciated.
I’d be happy to test experimental code or contribute logs from my device
if that helps move HID support forward.
Thanks for your time and for all the work on sigrok.
sigrok-cli is an absolute Godsend to me as a totally blind hacker.
Mike
--
Michael A. Ray
Software engineer
Witley, Surrey, South-east UK
He/him
"Perfection is achieved, not when there is nothing more to add, but when
there is nothing left to take away." -- A. de Saint-Exupery
_______________________________________________
sigrok-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sigrok-devel
