On Tue, 25 Nov 2025 10:28:40 +0000
Michael A Ray via sigrok-devel <[email protected]>
wrote:
>
> Hello all,
>
> I’ve been experimenting with a UNI-T UT612 LCR meter that uses the
> CP2110 HID-UART bridge (USB VID:PID 10c4:ea80). I’ve built libsigrok and
> sigrok-cli from current master, with HIDAPI detected at configure time.
> However, sigrok-cli --scan only shows the demo device, and the
> uni-t-ut612 driver appears to expect a serial port (/dev/ttyUSB*).
please post the output of "sigrok-cli -l 5 --scan", so we get the
verbose logs
Dan
> Could someone clarify the current status of HID support for the UT612?
>
> • Has HID binding for the UT612 driver been merged, or is it still pending?
> • Is there a development branch or patchset I should test?
> • Any guidance on decoding the HID frames directly would also be
> appreciated.
>
> I’d be happy to test experimental code or contribute logs from my device
> if that helps move HID support forward.
>
> Thanks for your time and for all the work on sigrok.
>
> sigrok-cli is an absolute Godsend to me as a totally blind hacker.
>
> Mike
>
>
> --
> Michael A. Ray
> Software engineer
> Witley, Surrey, South-east UK
>
> He/him
>
> "Perfection is achieved, not when there is nothing more to add, but when
> there is nothing left to take away." -- A. de Saint-Exupery
>
>
>
>
>
> _______________________________________________
> sigrok-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/sigrok-devel
_______________________________________________
sigrok-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sigrok-devel
