Marsha wrote: > My generator instructions called for 10 inches of 14 gauge .999 fine > silver wire. With 4 inches submerged, you should get 1PPM per minute of > activation time using 8 ounces of distilled water, and some saline.
> From a year`s usage and more reading, I learned to make mine with > no saline, using 2 cups of water, 16 ounces. I don`t let it touch > the glass, because it causes the silver to precipitate onto the > glass in a pretty fern shape. I`d rather have the silver in the > water! How far apart are the electrodes, Marsha? I could tell that the reaction was *much* faster if the electrodes nearly touch. But I had the "fern" reaction, possibly because they were too close to the glass. I haven't tried it without saline since bending the electrodes so they were away from the glass. > I "cook" mine for one hour, beginning to time it after I see golden > "smoke" coming off one wire. This should give 30 PPM. My solution > is now always golden. With the saline it is gray. How long does it usually take for the "smoke" to appear -- at the electrode spacing you're using, that is. <grin> > Until I can get some tested, I can`t really be sure of the PPM strength. > I do, however, know that what I make is working for me. It cured my 3rd > Stage Disseminated Lyme Disease (boy, don`t that sound nasty??!!) and I > have had NO urinary infections, which I used to get several times a > year. I have had 4 colds this last year, since May; they were very mild, > and were gone after 2-3 days. Hooray for health! > So, though I am no expert, this is my experience. Hope it helps some. > Marsha, feelin` BETTER in Milwaukee! You bet! Mike [Mike Devour, Citizen, Patriot, Libertarian] [[email protected] ] [Speaking only for himself... ]
