List; I set up my CS unit to try a drip method of CS production. This is just your regular set up but with the electrodes supended above a catch container, hanging high and dry. The spacing of the electrodes is set about 1/8" apart. This allows a drop of water to slide down touching both electrodes when dripped from above. The drop then falls down to your catch container. I started with an eye dropper and dripped 2 oz through. This took about 4 minutes. This is a lot of eye dropper work so setup a drip system to feed the electrodes. This shortened the time to about 2 minutes with a quick drip. I tried this 6 times using HVAC, LVDC, PLVDC. Starting water steam DW.
HVAC 1200 volts AC 2 minute run time light tyndall ( YES TYNDALL in 2 minutes ) clear result very light taste no drop out no trees LVDC three 9 volt batteries SAME RESULTS PLVDC 24 volt 120 pusles per minute SAME RESULTS Please try this to confirm my results. I appears to be effective CS. -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: [email protected] -or- [email protected] with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: [email protected] List maintainer: Mike Devour <[email protected]>
