10 PPM is fine. I just wanted to get into the 15-20 ppm range without the color and the fish bubbler helped "my set up" to accomplish that. It also helped decrease the particulate matter that is produced and decreases my time for a batch.,
SS On 6/12/07, Leslie <[email protected]> wrote:
I was told that the ideal was 10 ppm. When mine goes over it starts turning brown. Sooo, I'm thinking either I was told wrong or my measurer is not ppm's. Thanks, Leslie ----- Original Message ----- *From:* Silver Smith <[email protected]> *To:* [email protected] *Sent:* Tuesday, June 12, 2007 5:18 PM *Subject:* Re: CS>generator repair question I use a $6.00 fish tank bubbler I got at Walmart that works great. I am able to consistently make clear 20 ppm. Before I implemented the bubbler, it was hard to get above 13-15 w/o it beginning to turn yellow. I run the bubble tube all the way to the bottom between the electrodes so the bubbles run up the side of the 1 Qt jar. Works great. Very consistent batches. SS On 6/9/07, [email protected] <[email protected] > wrote: > > I'm hoping someone knowledgeable about CS generators might be able to > help > me with a repair question. The stirring motor on my SG-6 has gone out > and > the quote for fixing/replacing it is one third the original price I paid > about 2 years ago. I've made around 10 gallons of CS during that time. > At least one other person with an identical unit reports having the same > problem, had the stirring motor replaced, and had that motor burn out as > well. > > I'd like to know if there is a good alternative stirring method for a > unit > like this - maybe a way to rig up an adequate thermal stirrer, bubbler, > etc. for making one quart at a time. > > Thanks very much, > Deborah > > > -- > The Silver List is a moderated forum for discussing Colloidal Silver. > > Instructions for unsubscribing are posted at: http://silverlist.org > > To post, address your message to: [email protected] > > Address Off-Topic messages to: [email protected] > > The Silver List and Off Topic List archives are currently down... > > List maintainer: Mike Devour < [email protected]> > > >
