What kind of distilled water are you using? Do you add anything either before or after making the CS? Most of us would get light yellow if it turned color, not brown... Dan
________________________________ From: Leslie [mailto:[email protected]] Sent: Tuesday, June 12, 2007 5:52 PM To: [email protected] Subject: Re: CS>generator repair question I was told that the ideal was 10 ppm. When mine goes over it starts turning brown. Sooo, I'm thinking either I was told wrong or my measurer is not ppm's. Thanks, Leslie ----- Original Message ----- From: Silver Smith <mailto:[email protected]> To: [email protected] Sent: Tuesday, June 12, 2007 5:18 PM Subject: Re: CS>generator repair question I use a $6.00 fish tank bubbler I got at Walmart that works great. I am able to consistently make clear 20 ppm. Before I implemented the bubbler, it was hard to get above 13-15 w/o it beginning to turn yellow. I run the bubble tube all the way to the bottom between the electrodes so the bubbles run up the side of the 1 Qt jar. Works great. Very consistent batches. SS On 6/9/07, [email protected] <[email protected] > wrote: I'm hoping someone knowledgeable about CS generators might be able to help me with a repair question. The stirring motor on my SG-6 has gone out and the quote for fixing/replacing it is one third the original price I paid about 2 years ago. I've made around 10 gallons of CS during that time. At least one other person with an identical unit reports having the same problem, had the stirring motor replaced, and had that motor burn out as well. I'd like to know if there is a good alternative stirring method for a unit like this - maybe a way to rig up an adequate thermal stirrer, bubbler, etc. for making one quart at a time. Thanks very much, Deborah -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: [email protected] Address Off-Topic messages to: [email protected] The Silver List and Off Topic List archives are currently down... List maintainer: Mike Devour < [email protected]>
