Hi mike, http://www.atlasnova.com/CSMakingInfo.htm<mhtml:{07B339EE-C45C-48A7-A01D-012C2E73FA1D}mid://00000003/!x-usc:http://www.atlasnova.com/CSMakingInfo.htm>
http://www.atlasnova.com/ColloidalSilverStarterKit.htm<mhtml:{07B339EE-C45C-48A7-A01D-012C2E73FA1D}mid://00000003/!x-usc:http://www.atlasnova.com/ColloidalSilverStarterKit.htm> I was thinking about replying to her post but I just didn't know what to say. As usual, you have done a better job of this than I could do. I'm having trouble understanding the whole situation. She first mentions some 200 PPM product from the "dynamite" company called "solace". I have trouble getting past that. She then puts some of this into a quart of distilled water, supposedly to come up with five PPM. She only gets a red line after she shakes this concoction. Those must be some humongous size particles. She even said that they fell to the bottom so she must be able to actually see them. Now if she made some using the setup that she bought from me I don't think shaking it would have any effect even in the case of overcooking, as long as it was properly decanted. I purposely set up the kit and the illustrated explanation of its use so that users could , if they wished, make a dark yellow colloidal silver. In years gone by, we would have regarded this as premium stuff. We have since learned better. But even the yellow stuff would take an awful lot of shaking before it would actually settle out. The current involved in the setup is one milliamp, which is really far too much for a 4 inch piece of wire and quite a bit of staff will collect on the cathode. Most of the people and who have purchased this "Starter" kit and have then graduated to the 1 gallon per day set up that adheres to the rule of 100 micro amps per square inch. It never turns yellow but will get stronger the longer time you give it up to 24 hours. Here is a link explaining that. http://goldismoney.info/forums/showthread.php?t=322679<mhtml:{07B339EE-C45C-48A7-A01D-012C2E73FA1D}mid://00000003/!x-usc:http://goldismoney.info/forums/showthread.php?t=322679> Best Regards, Arnold On Wed, Dec 24, 2008 at 4:27 PM, M. G. Devour <[email protected]> wrote: > I just wanted to bump this to see if anybody has any other thoughts for > Lois... > > Lois, > > Welcome to the group! > > If you have particles that are settling out, then you're definitely > dealing with something that's not what we've come to consider "best." > It's not going to do you any serious harm to use what you have, but I'd > be very concerned about that 200ppm stuff long-term. > > As for the product of your generator: I'm not familiar with Abe's > generator setup, but it sounds like he uses series resistors to limit > the current, right? How long does a batch take to make, and what size > batch is it? > > Are there fuzzy deposits on one or both electrodes when you're > finished, and do you mix these in? If so, that could be the source of > your settling. General good practice is to remove the electrodes from > the water carefully to avoid dislodging any such deposits and letting > any that do get shaken loose settle. > > So, short answer, let it settle out and decant the rest, which should > be predominatly ionic and *small* particle, and safer to use long term. > > Any other thoughts, folks? Abe, wanna give us some details of your > generator design so we can comment intelligently about it? <grin> > > Thanks, > > Mike D. > > > I bought some 200ppm from the dynamite co. They call theirs "solace". I > > mixed 1-half tsp. in distilled h2o to come up with 5ppm. I did about a > > quart. It was about 2- 3 weeks ago. {kept in a dark brown bottle in a > > cool room in the dark } Just got a bottle out and find that the laser > > line is weak---if I turn the bottle a few times the line is dark red. > > My question is---Is this safe to use internally or are the silver > > particles too large?? { they fell to the bottom.} I have only been > > learning about silver and it's uses for a short time & have so very much > > to learn. > > I also got a generator set up from abeland&altasnove.com which > > uses 4 > > 9V batteries, a meter with a 33K resistor & two 4 9's 4 inch silver > > wires. We > > made 1 batch, last week. I have noticed that the same thing is > > happening , a > > light line and then dark when it is mixed..} What did I do wrong,??? > > Thanks for any help you can give===Lois > > > > -- > The Silver List is a moderated forum for discussing Colloidal Silver. > > Instructions for unsubscribing are posted at: http://silverlist.org > > To post, address your message to: [email protected] > > Address Off-Topic messages to: [email protected] > > The Silver List and Off Topic List archives are currently down... > > List maintainer: Mike Devour <[email protected]> > > >
