For what it is worth Dynamite Solace claims to be " Pure Colloidal Silver (200 ppm) in a base of distilled water and electrolytes.". No other info. - Steve N
----- Original Message ----- From: Marshall Dudley <[email protected]> To: [email protected] <[email protected]> Sent: Fri Dec 26 09:50:23 2008 Subject: Re: CS>(LL) Hi,A silver ?? for the wise ones--- Here is my best guess, since I don't know anything about what you purchased. If it was 200 ppm, then it was NOT colloidal silver. It was either a silver compound, or a silver protein. My guess would be a silver protein. Silver proteins have the silver bound up in a protein, and are of larger particle size, so their effectiveness is about 1/50 that of properly made colloidal silver. That is the 200 ppm MSP is about as effective as 4 ppm EIS. Now if you dilute that to 5 ppm, that would be a 40 to one dilution. The effectiveness would go to near 0, and there is nothing to prevent the protein from being attacked by bacteria and fungi any more. So my suspicion is that what you are seeing setting out is probably either bacteria, fungi, or spores from them. Marshall M. G. Devour wrote: > I just wanted to bump this to see if anybody has any other thoughts for > Lois... > > Lois, > > Welcome to the group! > > If you have particles that are settling out, then you're definitely > dealing with something that's not what we've come to consider "best." > It's not going to do you any serious harm to use what you have, but I'd > be very concerned about that 200ppm stuff long-term. > > As for the product of your generator: I'm not familiar with Abe's > generator setup, but it sounds like he uses series resistors to limit > the current, right? How long does a batch take to make, and what size > batch is it? > > Are there fuzzy deposits on one or both electrodes when you're > finished, and do you mix these in? If so, that could be the source of > your settling. General good practice is to remove the electrodes from > the water carefully to avoid dislodging any such deposits and letting > any that do get shaken loose settle. > > So, short answer, let it settle out and decant the rest, which should > be predominatly ionic and *small* particle, and safer to use long term. > > Any other thoughts, folks? Abe, wanna give us some details of your > generator design so we can comment intelligently about it? <grin> > > Thanks, > > Mike D. > > >> I bought some 200ppm from the dynamite co. They call theirs "solace". I >> mixed 1-half tsp. in distilled h2o to come up with 5ppm. I did about a >> quart. It was about 2- 3 weeks ago. {kept in a dark brown bottle in a >> cool room in the dark } Just got a bottle out and find that the laser >> line is weak---if I turn the bottle a few times the line is dark red. >> My question is---Is this safe to use internally or are the silver >> particles too large?? { they fell to the bottom.} I have only been >> learning about silver and it's uses for a short time & have so very much >> to learn. >> I also got a generator set up from abeland&altasnove.com which >> uses 4 >> 9V batteries, a meter with a 33K resistor & two 4 9's 4 inch silver >> wires. We >> made 1 batch, last week. I have noticed that the same thing is >> happening , a >> light line and then dark when it is mixed..} What did I do wrong,??? >> Thanks for any help you can give===Lois >> > > > > -- > The Silver List is a moderated forum for discussing Colloidal Silver. > > Instructions for unsubscribing are posted at: http://silverlist.org > > To post, address your message to: [email protected] > > Address Off-Topic messages to: [email protected] > > The Silver List and Off Topic List archives are currently down... > > List maintainer: Mike Devour <[email protected]> > > > > > > . > >
