I have a friend who started shingles out breaks not long after I got my
generator from Arnold. I gave her some EIS and she drank about 2oz. and also
applied it topically. Within 3 days they were almost gone. That was when she
had
me order a generator for her. she has had one session since but it cleared
within a day or so. I do realize that not all cures work for all people cause
we are all different but it worked for her & she is so thankful !! Lois
I had my brew tested by a young man I taught in first grade. He works
for an environmental lab. in Buffalo. The results were 10 + ppm.
This is the report he sent me. Any observations by others is
appreciated....
I ran your silver colloid sample 2 times.
The results I got were about 10 ppm or 10 mg/l.
There was a small problem in that the blank sample that we ran after yours
should have been clean of any silver (This is too ensure none of the sample
gets stuck in the instrument and not correctly analyzed with the sample).
There
was some silver in the blanks after the sample. So this means that the
result of 10 ppm probably was low. How much it is impossible to tell. Some
samples
do not totally dissolve in our pretreatment so before analyzing. This is
probably what happened. So I would say that your silver water has at least 10
ppm in it, probably some more.
If you would like any further explaination or help let me know. I hope this
helps.
If there are questions you think I should ask---please let me know...
Thanks, Lois
**************A Good Credit Score is 700 or Above. See yours in just 2 easy
steps!
(http://pr.atwola.com/promoclk/100126575x1220685763x1201394209/aol?redir=http:%2F%2Fwww.freecreditreport.com%2Fpm%2Fdefault.aspx%3Fsc%3D668072%26hmpgID
%3D62%26bcd%3DMarchfooterNO62)
