In short, yes. Did you read Marshall's theory on how making concentrated EIS at high temperature might work? I think that this is the same concept except that you make the EIS before concentration. That plus the statement by Dave that when you dilute it back to a normal EIS ppm you get a clear solution makes me believe that it does work and provides a low particle size after dilution. My guess is that even if you were to use it at the higher concentration where there is still color to the solution, further dilution in the stomach would still effectively provide the smaller particle size. Although I would like to hear other opinions on this. - Steve N
From: Peter Converse [mailto:pconve...@primus.ca] Sent: Wednesday, December 09, 2009 2:45 PM To: Norton, Steve; silver-list@eskimo.com Subject: Re: CS>Concentrated silver? thanks Steve...that would make more sense, come to think of it. I must be reading too much and getting almost cross-eyed in doing so.... would this process boost the ppm concentration while keeping particle size down, do you think? Peter ----- Original Message ----- From: Norton, Steve To: silver-list@eskimo.com Sent: Wednesday, December 09, 2009 3:25 PM Subject: RE: CS>Concentrated silver? I assumed he was refilling it with EIS. - Steve From: Peter Converse [mailto:pconve...@primus.ca] Sent: Wednesday, December 09, 2009 12:15 PM To: Dave Darrin; silver-list@eskimo.com Subject: Re: CS>Concentrated silver? Hi Dave, What is the purpose of refilling with distilled water and repeating the process after the initial steaming off of about half the water? Wouldn't it become more concentrated by lengthening the initial steaming off period without the addition of more water and repeating the process? Wouldn't doing this be redundant? I may be missing something here....could you explain? Are your ppm (TDS) readings higher after completion in your concentrate than they were in the CS you began with? many thanks, Peter ----- Original Message ----- From: Dave Darrin To: silver-list@eskimo.com Sent: Monday, December 07, 2009 4:14 PM Subject: Re: CS>Concentrated silver? I sent this message,I thought to the silver list, but it only went to Scott Adams. I have gmail and it does that every now and then. My parent email is comcast and they block the silver list most of the time--but not all so I guess I'll have to use more diligence to see where my messages are going. Here it is again: ________________________________________ From: Dave Darrin [mailto:davedar...@gmail.com] Sent: Monday, December 07, 2009 12:53 PM To: msad...@msadams.com Subject: Re: CS>Concentrated silver? I have concentrated EIS by putting it in a coffee carafe and putting it on the coffee maker hot plate. When it steams off about half of the water I refill it and repeat until the solution turns a dark gold to brown appearance. At that point if you add the same amount of distilled water as you reduced the solution will turn back to clear. So I would think you could reduce even farther and reconstitute it with distilled water from any concentration if you keep in mind the amount you removed. The buzz word in this is "distilled" as I wouldn't recommend using tap water but it might not make a difference. An interesting phenomenon here is that the color doesn't seem to indicate larger particle size as adding the original amount of distilled water returns it to clear. Dave -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Address Off-Topic messages to: silver-off-topic-l...@eskimo.com The Silver List and Off Topic List archives are currently down... List maintainer: Mike Devour <mdev...@eskimo.com>
