If you wait a few days, it'll clear it up.
Test a sample.
Ode
At 12:13 PM 7/21/2011 -0700, you wrote:
I've done that and it turns to muddy ...I have yellow and just use it like
the clear...Debbie
-----Original Message-----
Date: Thursday, July 21, 2011 2:58:55 pm
To: [email protected]
From: [email protected]
Subject: Re: CS>CS Production Method
I have a question,
I have been making c/s for 11 yrs , this time it came out a bright yellow!! I
did everything the same as always but.. the only thing different was that
I went
out and left it too long it was 22 pm all th rest was 13-14 pm.
Could I put some h202 in the bottle?
Mary
________________________________
From: Bill Halle <[email protected]>
To: [email protected]
Sent: Thu, July 21, 2011 9:25:26 AM
Subject: CS>CS Production Method
The suggestion to put a tiny amount of H202 in the water as an electrolyte
is an
interesting idea which I will try. In the meantime I have had a lot of
success
just adhering to the fundamentals:
1- Pyrex gallon jar for production
2- .9999 pure very thin silver wire, as thin and pure as I can buy it.
3- Make electrodes of about 5 feet long wire loosely looped to a twisted loop
about 8 inches long about 1/2 inch diameter for both electrodes.
4- Just use the device per directions and you will get a very high quality 20
PPM product.
Sent from my
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Rules and Instructions: http://www.silverlist.org
Unsubscribe:
<mailto:[email protected]?subject=unsubscribe>
Archives:
http://www.mail-archive.com/[email protected]/maillist.html
Off-Topic discussions: <mailto:[email protected]>
List Owner: Mike Devour <mailto:[email protected]>
