Well, If I recall, he said he had a few people with some viral infections who took care of it with his stuff sublingually (not swallowed), when lower PPM EIS did not do it with swallowing. That is not something that should be ignored. I also know on the salt/C forum, there are I think 2 or 3 people with lyme who peaked on oral EIS, but continued to herx after switching to Silver 100. So different silver products of various types of concentrations can be complementary and/or work differently or better than others.
I seem to recall some people on this forum have shared anecdotes of a certain PPM not cutting it, but then working once the brewed it at a higher PPM. Could be mistaken though. He has produced roughly 40PPM before (last I checked anyway, before he kicked me off his forum). As I see it, there is potential for much higher than 40PPM actually. It is definitely worth investigating. The very fact that he got anything significantly above 26PPM raises questions about the theoretical limitation of his process. What if it were possible to make 100PPM for example? His process seems to avoid the nernst diffusion layer becoming too thick and forming silver hydroxide at the electrodes, but then there is a flattening out of conductance when he gets higher up towards 40PPM. There is some secondary limitation now, that is not due to the nernst diffusion layer. He said it had something to do with ions becoming to gathered around the electrode to which is had migrated, reaching a point where they plateout as fast than they are added to solution if I remember correctly. He could manage this for a while by swapping polarity once or twice once the conductivity started flattening out. There would be further increases in the conductivity this way, but eventually this polarity swapping stopped providing additional increase in conductance. I suggested to him a very very light thermal stirring might disperse the silver ions near the electrodes more evenly into the solution, and possibly make his process bypass this secondary limitation, possibly getting PPM much higher than 40, even without need for polarity swapping. He dismissed it as laughable like half of every other suggestion people make. The other half of comments he praises as being genius. One way to really keep a low current density is use the 99.9 silver tubing I linked to like a month ago. No one seems to have used that in a generator yet. It has many times the surface area of 12 gauge wire. They have many widths to choose from. More electrode surface area might also alleviate this congregating of silver ions near the electrode (perhaps proportionally with the increase of surface area), which is the secondary limitation he runs into - the first limitation being the nernst layer, not being a problem in theory as his current density stays constant below an unspecified experimental threshold for the parameters of his generator. He is super sick with mold illness. Unfortunately it seems he does not know anything about treating it. He is constantly exposed to mold, and if he does not move, it is hopeless. He would rather fiddle with this and that device to try and manage the mold in his apartment. Even if you are not exposed to mold at all, people are still sick, not at all because of mold exposure or mold infection, but because of leftover biotoxons that they cannot properly eliminate. Killing mold in your body is not enough to beat mold illness. Detox is the main problem. There are doctors who treat mold illness specifically, and he has no chance on stumbling over what they know he needs to do. It is actually a really complicated treatment. His plan to make it doable for the single mom is not going to work. He drives here and there scrounging for cheap parts that stores are trashing. etc. No one is gonna do that. It needs to be sold prebuilt or its hopeless. David, are you still on his forum? Supposedly he will eventually have a instruction manual for others to replicate his generator, so for most of us, we just wait for that and his documentation of the process and his experiments. Seriously though, a lot of info could eventually come out of his stuff. David On Wed, Dec 14, 2011 at 6:05 PM, Alchemysa <[email protected]> wrote: > Anyone been able to make head or tail of this? Mike originally suggested > the whole thing was just about finalised, but it seems far from it. In fact > its looking more and more like one long meander up the garden path to me. > Things seem still to be very much in the development phase to me, and for > very little benefit anyway. A few extra ppm of ionic silver 'might' be > produced, but for exactly what purpose? Mike's claims of high ionic ppm > being vastly superior is based on a clinical trail of one person - himself. > (A man who is constantly sick). Sadly some of his 'followers' seem to be > hanging on tenterhooks waiting for the big breakthrough instead of just > being directed on how to make easy, simple CS like we do. > > > David > > > > -- > The Silver List is a moderated forum for discussing Colloidal Silver. > Rules and Instructions: http://www.silverlist.org > > Unsubscribe: > <mailto:silver-list-request@**eskimo.com <[email protected]> > ?subject=**unsubscribe> > Archives: http://www.mail-archive.com/**[email protected]/** > maillist.html<http://www.mail-archive.com/[email protected]/maillist.html> > > Off-Topic discussions: > <mailto:silver-off-topic-list@**eskimo.com<[email protected]> > > > List Owner: Mike Devour <mailto:[email protected]> > > >
