Ivan,
What current would you suggest regulating at? I am using an FET(Field
Effect Transistor) 2N2608 as a current regulator.
It is set at .5ma short circuit. A resistor(1Kohm in my case)
from the source to gate sets the current regulator rate. The gate is the
input and the drain is the output. I did this because I didn't have much
luck with the LM317, which regulated at 1ma and no lower.
I am using the Pulsed DC gen.
Thanks
BillH
-----Original Message-----
From: Ivan Anderson [mailto:[email protected]]
Sent: Thursday, October 28, 1999 3:33 AM
To: [email protected]
Subject: Re: CS>Unidentified subject!
Jim,
The change in colour indicates coagulation or flocculation of the
silver particles, ie they're getting bigger for some reason.
What current are you regulating at. Being current limited implies that
your voltage will drop to low levels rather quickly. Also I take it
that you use 110 V AC power source, have you measured the voltage at
the electrodes?
Will be in a position to help you if you supply these parameters.
Ivan
----- Original Message -----
From: Jim Keltner <[email protected]>
To: <[email protected]>
Sent: Wednesday, 27 October 1999 14:11
Subject: CS>Unidentified subject!
> I am new at generating cs for my own use and would like to know if
any one
> could explain why the color of the solution is usually yellowish
but
> some-times turns to a pinkish color.This change in color may take
one week
> to three weeks and sometimes is clear to pinkish from the very
begining.
> I am using a generator with current regulator,no salt and 110
volts.My
> directios call for 16oz. of distilled water applied current for
5hrs. to
> obtain 15-20ppm.Any response to [email protected] would be
appreciated.
>
>
> --
> The silver-list is a moderated forum for discussion of colloidal
silver.
>
> To join or quit silver-list or silver-digest send an e-mail message
to:
> [email protected] -or-
[email protected]
> with the word subscribe or unsubscribe in the SUBJECT line.
>
> To post, address your message to: [email protected]
>
> List maintainer: Mike Devour <[email protected]>
>
