HI Ivan, I measured the secondary a couple of times. It is center tapped, so the meter reads 1/2 the voltage.
It starts at about 9.7K and drops during the process. I was only interested in proving that the tran was outputting in the normal range and did not correlate voltage with anything. The process is current limited by the characteristics of the tran. I have yet to locate a milliampmeter which will read the secondary. It is on my long list which keeps getting longer. Tell me the parameters you need, and suggest how I can measure them and I will try to get the data. James Osbourne Holmes [email protected] -----Original Message----- From: Ivan Anderson [SMTP:[email protected]] Sent: Thursday, October 28, 1999 4:33 AM To: [email protected] Subject: Re: CS>Unidentified subject! Jim, The change in colour indicates coagulation or flocculation of the silver particles, ie they're getting bigger for some reason. What current are you regulating at. Being current limited implies that your voltage will drop to low levels rather quickly. Also I take it that you use 110 V AC power source, have you measured the voltage at the electrodes? Will be in a position to help you if you supply these parameters. Ivan ----- Original Message ----- From: Jim Keltner <[email protected]> To: <[email protected]> Sent: Wednesday, 27 October 1999 14:11 Subject: CS>Unidentified subject! > I am new at generating cs for my own use and would like to know if any one > could explain why the color of the solution is usually yellowish but > some-times turns to a pinkish color.This change in color may take one week > to three weeks and sometimes is clear to pinkish from the very begining. > I am using a generator with current regulator,no salt and 110 volts.My > directios call for 16oz. of distilled water applied current for 5hrs. to > obtain 15-20ppm.Any response to [email protected] would be appreciated. > > > -- > The silver-list is a moderated forum for discussion of colloidal silver. > > To join or quit silver-list or silver-digest send an e-mail message to: > [email protected] -or- [email protected] > with the word subscribe or unsubscribe in the SUBJECT line. > > To post, address your message to: [email protected] > > List maintainer: Mike Devour <[email protected]> >
