Sam,

The silver ions are released from the positive electrode (anode) by
reason of the potential difference applied (voltage) between the
positive and negative (cathode) electrodes. It matters little what the
metal the cathode is made of (there are effects that lie outside this
discussion) as any silver ions that contact the cathode, be it silver
or some other metal, are rendered to waste as far as colloidal silver
is concerned.

You are correct in the assumption that the cathode becomes plated with
silver.

The reason I use a silver cathode is that I can be sure that I cannot
generate anything other than silver particles, even if the leads are
reversed, and if the power fails whilst the electrodes are submerged
there can be no dissolution of contaminating ions into the solution
from the cathode.

There may be other reasons to question the use of a conductive pot, to
do with electrode polarisation etc. but it may turn out to be
advantageous.

Ivan.

----- Original Message -----
From: Sam Earle <[email protected]>
To: <[email protected]>
Sent: Friday, 29 October 1999 11:32
Subject: Re: CS>round conductive pot idea


> Question for the chemists/engineers: If the negative pole is a
dissimilar
> metal to the positive silver electrode, aren't we just going to be
> silver-plating the metal? I was under the impression that silver
ions are
> freed into the water by virtue of the fact that the negative
electrode
> (anode?) is not dissimiliar and thus does not bind with the positive
silver
> ions as, say copper, would. Why wouldn't the iron and nickel in
stainless
> steel do the same thing. Nickel, if I'm not mistaken, is often used
as a
> base plating prior to applying silver or gold plate.
>
> Anyone?
>
> Sam



--
The silver-list is a moderated forum for discussion of colloidal silver.

To join or quit silver-list or silver-digest send an e-mail message to: 
[email protected]  -or-  [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.

To post, address your message to: [email protected]

List maintainer: Mike Devour <[email protected]>