Hi All I have always used a stainless cathode nad a silver anode. The cathode has not got silver plated altough it does get black. When I started I was using silver for both and the cathode still got black. I noticed no difference in colour of the CS.
James H-McMillan Ivan Anderson wrote: > Sam, > > The silver ions are released from the positive electrode (anode) by > reason of the potential difference applied (voltage) between the > positive and negative (cathode) electrodes. It matters little what the > metal the cathode is made of (there are effects that lie outside this > discussion) as any silver ions that contact the cathode, be it silver > or some other metal, are rendered to waste as far as colloidal silver > is concerned. > > You are correct in the assumption that the cathode becomes plated with > silver. > > The reason I use a silver cathode is that I can be sure that I cannot > generate anything other than silver particles, even if the leads are > reversed, and if the power fails whilst the electrodes are submerged > there can be no dissolution of contaminating ions into the solution > from the cathode. > > There may be other reasons to question the use of a conductive pot, to > do with electrode polarisation etc. but it may turn out to be > advantageous. > > Ivan. > > ----- Original Message ----- > From: Sam Earle <[email protected]> > To: <[email protected]> > Sent: Friday, 29 October 1999 11:32 > Subject: Re: CS>round conductive pot idea > > > Question for the chemists/engineers: If the negative pole is a > dissimilar > > metal to the positive silver electrode, aren't we just going to be > > silver-plating the metal? I was under the impression that silver > ions are > > freed into the water by virtue of the fact that the negative > electrode > > (anode?) is not dissimiliar and thus does not bind with the positive > silver > > ions as, say copper, would. Why wouldn't the iron and nickel in > stainless > > steel do the same thing. Nickel, if I'm not mistaken, is often used > as a > > base plating prior to applying silver or gold plate. > > > > Anyone? > > > > Sam > > -- > The silver-list is a moderated forum for discussion of colloidal silver. > > To join or quit silver-list or silver-digest send an e-mail message to: > [email protected] -or- [email protected] > with the word subscribe or unsubscribe in the SUBJECT line. > > To post, address your message to: [email protected] > > List maintainer: Mike Devour <[email protected]>

