Jean -- take a paper towel and wipe out the inside of your jar. I found that
there can occur a film from the silver (plating) that blocks the laser beam.
:-)MA
On Wednesday, June 5, 2019, 12:17:54 AM CDT, Deborah Gerard
<[email protected]> wrote:
Do you seed your batch? Use some from the previous batch and add to the new
to make the brewing go faster? Do you have a warranty on your device? Hope you
find out what the problem is...did you test your water with a TDS tester before
you tried to make it?
On Tuesday, June 4, 2019, 2:54:39 PM EDT, Jean Baugh
<[email protected]> wrote:
Hi,
I have a nearly new colloidal silver machine and one that is nearly worn out
from all the many gallons it has made. I’ve only been using the new machine
for awhile now, merely switching it over to another glass jar when the first
one is finished. I used to check the laser beam but quit some time now.
Everything is the same, water brand, machine same, glass jars same, laser light
the same…. but suddenly yesterday, when I nonchalantly checked to see how
strong the laser beam was, there was no beam going through either jar, even
though the machine is automatic and set as high as it will go. The newest
machine seems to go through all the right motions and time, then shuts off, but
no beam.
Does anyone have a theory as to what might be wrong?
I cranked up the old machine but it will take days to find out if it makes a
beam.
Even if the old machine works, this will not explain the new machine.
Thank you,
Jean Baugh
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Rules and Instructions: http://www.silverlist.org
Unsubscribe:
<mailto:[email protected]?subject=unsubscribe>
Archives:
http://www.mail-archive.com/[email protected]/maillist.html
Off-Topic discussions: <mailto:[email protected]>
List Owner: Mike Devour <mailto:[email protected]>
