Hi Earle, Would you do the list a favor? Call the lab where they tested your silver and ask:
1. What method of analysis was used? 2. If wet chemistry and a spectrophotometer were used, what reagent set was used? 3. If above is true, was "digestion" used prior to analysis? Very important. If they will tell you a bit about the digestion process---what acid, etc., that may be useful. This may be a great help to us. Further, do you have any remaining silver from any tested batches? I you will send me a sample I will test it using a process in question, and it will give us a reference, particularly if the analysis was done by AA or Flame. No charge or nuthin for the test. A couple of ounces will suffice. If you will, write and I will give you my location. James Osbourne Holmes [email protected] -----Original Message----- From: Earle Bonner [SMTP:[email protected]] Sent: Tuesday, November 16, 1999 4:15 PM To: [email protected] Subject: RE: CS>What's the best Generator, Help!! -- On Tue, 16 Nov 1999 08:35:31 Hutt William J (Bill) DLPC wrote: >Earle, > > > How are you measuring your PPM? Is 7-10ppm measured or is this a >claim from the manufactures of your generator. > > BillH I made three test batches and sent them off to be tested! Get your FREE Email at http://mailcity.lycos.com Get your PERSONALIZED START PAGE at http://my.lycos.com -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: [email protected] -or- [email protected] with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: [email protected] Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <[email protected]>
