Hello again, Oh. Bob and I use essentially the same process, so it will not give us the control I was looking for, but thanks.
We generally get reasonable correspondence with our tests of the same sample. James Osbourne Holmes [email protected] -----Original Message----- From: Earle Bonner [SMTP:[email protected]] Sent: Wednesday, November 17, 1999 5:42 AM To: [email protected] Subject: RE: CS>What's the best Generator, Help!! -- On Tue, 16 Nov 1999 17:10:00 James Osbourne, Holmes wrote: >Hi Earle, > >Would you do the list a favor? Call the lab where they tested your silver >and ask: > >1. What method of analysis was used? >2. If wet chemistry and a spectrophotometer were used, what reagent set was >used? >3. If above is true, was "digestion" used prior to analysis? Very >important. If they will tell you a bit about the digestion process---what >acid, etc., that may be useful. > >This may be a great help to us. > >Further, do you have any remaining silver from any tested batches? I you >will send me a sample I will test it using a process in question, and it >will give us a reference, particularly if the analysis was done by AA or >Flame. No charge or nuthin for the test. A couple of ounces will suffice. > If you will, write and I will give you my location. > >James Osbourne Holmes >[email protected] It was tested by Ole Bob Berger who is on the list and you might know how he operates. If not, speak up ole bob! Get your FREE Email at http://mailcity.lycos.com Get your PERSONALIZED START PAGE at http://my.lycos.com -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: [email protected] -or- [email protected] with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: [email protected] Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <[email protected]>
