Roger, have you found the Holy Grail? Is sputtering 25+ times more effecient
("output increases by at least two orders of magnitude") then the relatively
loss less LVDC process? You and others often refer to "sputtering", the
definition which I know, (as in vacuum metalization) is the vaporization of a
metal (atoms, not ions?). Are you not then producing with sputtering a fine
suspension of silver particles?

Current density, in a real process, is rarely the wetted surface area but usually
the projected surface area with maybe a 10-20% adder for fringe effects. As to
the smaller particle size with the HVAC process, the LVDC process releases
ions and they seem to come in only one size! What is your reference to HVAC
making smaller particles?

[email protected] - A HV expert with no clue to why HVAC Cs is produced!
-------------------------------------------------------------------------------------------------------------
At 12:13 PM 6/5/2000, you wrote:
I think if you compare the output of a typical HVAC setup to the type of LVDC
set up recommended here, you will find a much lower output from HVAC.
However, if you sputter silver off the electrode the output increases by at
least two orders of magnitude.

To calculate current density, divide your operating current by the wetted
surface area of the silver electrodes. I don't think you'll find that the
current density difference sheds much light on the difference in CS output
between HVAC and LVDC. It probably has more to do with the high energy
required to produce the smaller particle size from HVAC.

Roger


--
The silver-list is a moderated forum for discussion of colloidal silver.

To join or quit silver-list or silver-digest send an e-mail message to: [email protected] -or- [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.

To post, address your message to: [email protected]
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <[email protected]>