In a message dated 00-06-05 23:41:46 EDT, you write:

<< Subj:     CS>Re:HVAC-LVDC
 Date:  00-06-05 23:41:46 EDT
 From:  [email protected] (Fred)
 Reply-to:  [email protected]
 To:    [email protected]
 
 Roger, have you found the Holy Grail? Is sputtering 25+ times more effecient
 ("output increases by at least two orders of magnitude") then the relatively
 loss less LVDC process? You and others often refer to "sputtering", the
 definition which I know, (as in vacuum metalization) is the vaporization of a
 metal (atoms, not ions?). Are you not then producing with sputtering a fine
 suspension of silver particles?

Fred:  Yes, you are partially correct. I believe what happens during 
sputtering is that the tip of the electrode becomes superheated well beyond 
the melting point of silver, producing a significant silver vapor pressure 
(At times I can see bubbles immerge from the surface of the molten silver 
sphere at the electrode tip.) Then the fast moving ionized plasma collide 
with the gaseous silver imparting a strong static charge as the silver atoms 
are rapidly quenched into the water bath below so silver oxide is not formed 
since (according to Ivan, and thermodynamics -- two equally reputable 
sources) it is not stable above 150 degrees C.   
 
 Current density, in a real process,  is rarely the wetted surface area but 
 usually the projected surface area with maybe a 10-20% adder for fringe 
effects.

Sounds about right Fred. I seem to have forgotten some of the finer points. 
Well, electrometallurgy was my minor anyway.

As to the smaller particle size with the HVAC process, the LVDC process 
releases
 ions and they seem to come in only one size! What is your reference to HVAC
 making smaller particles?

Well, Bruce Marx and David Ripley both claim to have SEM studies which show 
that their HVAC CS particles are smaller then CONVENTIONALLY produced LVDC 
CS. However, the type of LVDC CS produced by some "silver listers" (< 1 ma 
max, with stirring in ONLY DW) could be quite a bit smaller in particle size 
and distribution, I simply don't know. Secondly, if the mechanism above is 
more or less correct, SPUTTERED HVAC CS should have a very small particle 
size.
 
Roger


--
The silver-list is a moderated forum for discussion of colloidal silver.

To join or quit silver-list or silver-digest send an e-mail message to: 
[email protected]  -or-  [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.

To post, address your message to: [email protected]
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <[email protected]>