Alvin Rose wrote: > Marshall > do you have any information on the submerged electrode spacing > for the hvac colloidal silver..I have an high voltage transformer 10kv > with the primary winding connected to a variac...would the full 10 kv > be applied to the electrodes submerged in dw..I can apply any voltage > from 0 to 10kv for experimental tests..also what is the time factor for > 20 ppm generation of c/s in the dw.
We are running about 1 1/2 to 1 3/4 inch spacing. We use a 15 KV neon sign transformer (actually 4 in parallel), which when properly loaded to 25-30 mA each produces right at 10 Kv. The water is introduced at 32 F, and the flow rate is adjusted for the ppm we want. The electrode exposure is adjusted for 10KV. Both current and voltage are metered. Marshall -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: [email protected] -or- [email protected] with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: [email protected] Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <[email protected]>
