Russ, thank you for the further explanation.  

In repeating the process (and explicitly following your example), it works 
flawlessly.  No Bite from the 9V.  The sponge was just slightly damp with a 
very mild salt water solution.  Tried the process first from several 
positions on the right hand, and then also again on the left hand.  No bite.  

This was a single 9v, clip connector (5 in a package from Radio Shack).  The 
wires are 5 3/4 inches long, with a small wire nut attaching to a longer set 
of wires (12 inches).  The longer wires were taped to two pieces of copper 
(2x3 inches).  Sponges glued to the copper.  The handles were two small 
pieces of wood that hubby glued to the top of the copper pads.  

Will repeat the process tomorrow, and if the same results are obtained, will 
add one more 9v battery, and repeat the process with two batteries. 

Thank you so much for your detailed insight.  suzy