Harold;
I have used the coins[.9999] with success.I use alligator clips[Radio
Shacks'] and suspend the coins from a heavy wire gantry with approx half the
coin immersed in DW.The clips/wire can be held to the gantry with clothes
pins and spaced by sliding along horizontal wire.The gantry looks similar to
a swing set.
----- Original Message -----
From: <[email protected]>
To: <[email protected]>
Sent: Saturday, June 02, 2001 8:24 AM
Subject: CS>re: Re: CS>generic co-op


> Arnold,
>
> Would that advice apply if the alligator clips did not enter the water?
Do you where one might find alligator clips that would be satisfactory?
>
> Steve
>
> > ** Original Subject: Re: CS>generic co-op
> > ** Original Sender: "Arnold Beland" <[email protected]>
> > ** Original Date: Sat, 2 Jun 2001 07:58:40 -0400 (EDT)
>
> > ** Original Message follows...
>
> >
> > Dottie,
> >
> > This is not a good idea.  Nothing but pure silver should enter the
vessel.  Alligator clips contain a number of metals and are sometimes coated
with cadmium.
> >
> > Arnold
> >   ----- Original Message -----
> >   From: Dottie Glenn
> >   To: [email protected]
> >   Sent: Friday, June 01, 2001 11:18 PM
> >   Subject: Re: CS>generic co-op
> >
> >
> >
> >
> >
> >
> >   Hi Bob -
> >   Thanks for the response.  My thought using the silver coins is, they
are .9999 pure silver, weight 1 oz., and are 1-1/2" diameter and they will
last a very long time.  I'm assuming they will set down in the water all but
about 1/4".  They were actually given to me, so cost is nothing.  As I
understand it, they are worth $7 each currently - not such a bad price for
long use I'd say.  I was planning on attaching them with aligator clips to
the sides of the glass container.  The clips will be attached to wires that
run to a 6 volt dc transformer.
> >
> >   I guess I'll have to visit Radio Shack to explore your stirring
suggestions.  I'll let you know just what I can come up with.  After all is
said and done, I'd probably be better off just buying a pre-made one!
However, this experimentation is good for me!
> >
> >   Sorry to confound you with the coins, but I think it would be hard to
beat their purity and longevity.
> >
> >   ----Original Message Follows----
> >
> >   From: "Robert L. Berger"
> >   Reply-To: [email protected]
> >   To: [email protected]
> >   Subject: Re: CS>generic co-op
> >   Date: Fri, 01 Jun 2001 15:15:01 -0500
> >   Dottie;
> >   I don't know if I can help you, but here are my thoughts.
> >   Oh for goodness sakes, why are you using coins. I have no experience
with
> >   coins. By going off on a tangent from what is generally being done you
have
> >   raised more questions than shown on you post. It is so much easier to
work with
> >   wire.
> >   Sorry, but if you want to work with coins you are on your own as I
have never
> >   mounted coins to stand up to stirring. You probably paid more for the
coins that
> >   you would have for the wire. I don't know their size, I don't know how
you
> >   support them. This CS process is apredictable chemical reaction, when
all of the
> >   paramters are under control. It is a mathamatical problem. The wet
area of the
> >   anode determines the ideal amount of current for which the regulator
should be
> >   set.
> >   To make a constant current module will cost all of about $2.00. It
consists of a
> >   LM317T semiconductor and a resistor the value of which is determined
by the
> >   amount current that one wants to regulate. This depends on the surface
area of
> >   sliver in the water.
> >   > I'd like to make a quart at a time. Wal-Mart has a 50 oz plastic
> >   > container in the area were they had dinner plates etc, for about
$5.00. It has
> >   > a plastic lid that is excelent for mouning things. It has some metal
hardware
> >   > that I took off and threw away.
> >   The stir motor is a 1 1/2 volt DC motor from Radio Shack $1.00. with
the plastic
> >   insulation for a #14 copper house wire. One needs about 3 ohms of
resistance in
> >   one motor lead to slow it down. Bubbling DOES NOT WORK!!!!!!!
> >   Glue the motor on top of the plastic container lid, attach the coins
some way to
> >   the lid.
> >   > Your spacing of 3" is ok, but you need some way of measuring cell
current,
> >   > such as a digital multimeter. Only after making a few brews were you
have
> >   > logged thae data can you go by time, and then only is the
conductuivuty of the
> >   > Distilled water is reasonably the same.
> >   I don't what to be considered as a "party pooper" but the grade of CS
that you
> >   make will dependon the effort that you take to do it correctly.
> >   What are you using for a power supply?
> >   Please do not hesitate to ask more questions. I will be glad to answer
the best
> >   that I can. When you go through the archives read my posts on making
cs.
> >   "Ole Bob"
> >   >
> >   >
> >   >
> >   > Also, about the constant stirring. Did I undertand you to say that
the
> >   > stirring is more beneficial than the fish tank bubbler? If yes, just
where
> >   > or how can I obtain this sort of a device?
> >   >
> >   > I liked Dr. Jons instructions because they were fairly clear to a
layperson
> >   > like myself. But still, these nagging issues!
> >   >
> >   > I realize these questions are probably pretty elemental to you, but
I mean,
> >   > I'm starting at the bottom here and find conflicting info just
everywhere!
> >   > Thanks for your help! By the way, I have been going thru the
archives, but
> >   > it's pretty slow going and I have some rather urgent applications to
attend,
> >   > so I really do appreciate the help.
> >   >
> >   > Dot
> >   >
> >   > ----Original Message Follows----
> >   > From: "Robert L. Berger"
> >   > Reply-To: [email protected]
> >   > To: [email protected]
> >   > Subject: Re: CS>generic co-op
> >   > Date: Tue, 29 May 2001 19:31:21 -0500
> >   >
> >   > Dot;
> >   >
> >   > Basically to make good CS one needs to control the elecrode spacing,
wet
> >   > length of the electrodes, ans use constant stirring.
> >   >
> >   > There are generally two system types used; constant voltage and
constant
> >   > current. Each requires it's own set of cut-off paramters.
> >   >
> >   > CONSTANT VOLTAGE;
> >   > Uses batteries or a power supply that has a fixed voltage, and the
> >   > current in the brew cell is monitored with a digital multimeter in
one
> >   > lead of the cell. For a small amount 8 to 16 ounces with two #14
silver
> >   > wires as electrode the shut-off current is between 3 to 4 ma. for
larger
> >   > amounts of DW then then current must be adjusted for the increased
> >   > electrode surface area.
> >   >
> >   > CONSTANT CURRENT;
> >   > This uses a fixed power supply of 27 to 40 volts (can be higher) but
in
> >   > one cell lead is placed a semiconductor unit that is wire as a
constant
> >   > current source. This reduces the cell voltage by limiting the cell
> >   > current until the current reachs the set limiting value. At that
point
> >   > the current stays constant.
> >   >
> >   > In both systems constant stirring has been proven and has now been
added
> >   > to all of the commercial units. Bubbling of air through the CS does
not
> >   > supply the velocity between the electrodes to stop agglomeration of
the
> >   > silver particles. This can de demonstrated with the laser pointer.
It
> >   > shows up in the brightness of the Tyndall beam. The brighter the
beam
> >   > the larger the particles and we do notwant that. In fact the very
best
> >   > CS will have no T.E.
> >   >
> >   > I hope this help answer your questions. If you have more send them.
Also
> >   > visit the archives for aditional info.
> >   >
> >   > I appreciate Dr. Jon's input even if it is antiquated. It is making
more
> >   > people aware of CS. Remember he is an M.D. and so wemust allow him
some
> >   > leaway :-)
> >   >
> >   > "Ole Bob:
> >   >
> >   > --
> >   > The silver-list is a moderated forum for discussion of colloidal
silver.
> >   >
> >   > To join or quit silver-list or silver-digest send an e-mail message
to:
> >   > [email protected] -or- [email protected]
> >   > with the word subscribe or unsubscribe in the SUBJECT line.
> >   >
> >   > To post, address your message to: [email protected]
> >   > Silver-list archive:
http://escribe.com/health/thesilverlist/index.html
> >   > List maintainer: Mike Devour
> >   >
> >   > _________________________________________________________________
> >   > Get your FREE download of MSN Explorer at http://explorer.msn.com
> >
> >
>
> --------------------------------------------------------------------------
----
> >   Get your FREE download of MSN Explorer at http://explorer.msn.com
> >
> >
>
>
> >** --------- End Original Message ----------- **
>
> >
>