Arnold,

Would that advice apply if the alligator clips did not enter the water?  Do you 
where one might find alligator clips that would be satisfactory?

Steve

> ** Original Subject: Re: CS>generic co-op
> ** Original Sender: "Arnold Beland" <[email protected]>
> ** Original Date: Sat, 2 Jun 2001 07:58:40 -0400 (EDT)

> ** Original Message follows... 

>
> Dottie,
> 
> This is not a good idea.  Nothing but pure silver should enter the vessel.  
> Alligator clips contain a number of metals and are sometimes coated with 
> cadmium.  
>    
> Arnold
>   ----- Original Message ----- 
>   From: Dottie Glenn 
>   To: [email protected] 
>   Sent: Friday, June 01, 2001 11:18 PM
>   Subject: Re: CS>generic co-op
> 
> 
> 
> 
> 
> 
>   Hi Bob - 
>   Thanks for the response.  My thought using the silver coins is, they are 
> .9999 pure silver, weight 1 oz., and are 1-1/2" diameter and they will last a 
> very long time.  I'm assuming they will set down in the water all but about 
> 1/4".  They were actually given to me, so cost is nothing.  As I understand 
> it, they are worth $7 each currently - not such a bad price for long use I'd 
> say.  I was planning on attaching them with aligator clips to the sides of 
> the glass container.  The clips will be attached to wires that run to a 6 
> volt dc transformer.
> 
>   I guess I'll have to visit Radio Shack to explore your stirring 
> suggestions.  I'll let you know just what I can come up with.  After all is 
> said and done, I'd probably be better off just buying a pre-made one!  
> However, this experimentation is good for me!
> 
>   Sorry to confound you with the coins, but I think it would be hard to beat 
> their purity and longevity.
> 
>   ----Original Message Follows---- 
> 
>   From: "Robert L. Berger" 
>   Reply-To: [email protected] 
>   To: [email protected] 
>   Subject: Re: CS>generic co-op 
>   Date: Fri, 01 Jun 2001 15:15:01 -0500 
>   Dottie; 
>   I don't know if I can help you, but here are my thoughts. 
>   Oh for goodness sakes, why are you using coins. I have no experience with 
>   coins. By going off on a tangent from what is generally being done you have 
>   raised more questions than shown on you post. It is so much easier to work 
> with 
>   wire. 
>   Sorry, but if you want to work with coins you are on your own as I have 
> never 
>   mounted coins to stand up to stirring. You probably paid more for the coins 
> that 
>   you would have for the wire. I don't know their size, I don't know how you 
>   support them. This CS process is apredictable chemical reaction, when all 
> of the 
>   paramters are under control. It is a mathamatical problem. The wet area of 
> the 
>   anode determines the ideal amount of current for which the regulator should 
> be 
>   set. 
>   To make a constant current module will cost all of about $2.00. It consists 
> of a 
>   LM317T semiconductor and a resistor the value of which is determined by the 
>   amount current that one wants to regulate. This depends on the surface area 
> of 
>   sliver in the water. 
>   > I'd like to make a quart at a time. Wal-Mart has a 50 oz plastic 
>   > container in the area were they had dinner plates etc, for about $5.00. 
> It has 
>   > a plastic lid that is excelent for mouning things. It has some metal 
> hardware 
>   > that I took off and threw away. 
>   The stir motor is a 1 1/2 volt DC motor from Radio Shack $1.00. with the 
> plastic 
>   insulation for a #14 copper house wire. One needs about 3 ohms of 
> resistance in 
>   one motor lead to slow it down. Bubbling DOES NOT WORK!!!!!!! 
>   Glue the motor on top of the plastic container lid, attach the coins some 
> way to 
>   the lid. 
>   > Your spacing of 3" is ok, but you need some way of measuring cell 
> current, 
>   > such as a digital multimeter. Only after making a few brews were you have 
>   > logged thae data can you go by time, and then only is the conductuivuty 
> of the 
>   > Distilled water is reasonably the same. 
>   I don't what to be considered as a "party pooper" but the grade of CS that 
> you 
>   make will dependon the effort that you take to do it correctly. 
>   What are you using for a power supply? 
>   Please do not hesitate to ask more questions. I will be glad to answer the 
> best 
>   that I can. When you go through the archives read my posts on making cs. 
>   "Ole Bob" 
>   > 
>   > 
>   > 
>   > Also, about the constant stirring. Did I undertand you to say that the 
>   > stirring is more beneficial than the fish tank bubbler? If yes, just 
> where 
>   > or how can I obtain this sort of a device? 
>   > 
>   > I liked Dr. Jons instructions because they were fairly clear to a 
> layperson 
>   > like myself. But still, these nagging issues! 
>   > 
>   > I realize these questions are probably pretty elemental to you, but I 
> mean, 
>   > I'm starting at the bottom here and find conflicting info just 
> everywhere! 
>   > Thanks for your help! By the way, I have been going thru the archives, 
> but 
>   > it's pretty slow going and I have some rather urgent applications to 
> attend, 
>   > so I really do appreciate the help. 
>   > 
>   > Dot 
>   > 
>   > ----Original Message Follows---- 
>   > From: "Robert L. Berger" 
>   > Reply-To: [email protected] 
>   > To: [email protected] 
>   > Subject: Re: CS>generic co-op 
>   > Date: Tue, 29 May 2001 19:31:21 -0500 
>   > 
>   > Dot; 
>   > 
>   > Basically to make good CS one needs to control the elecrode spacing, wet 
>   > length of the electrodes, ans use constant stirring. 
>   > 
>   > There are generally two system types used; constant voltage and constant 
>   > current. Each requires it's own set of cut-off paramters. 
>   > 
>   > CONSTANT VOLTAGE; 
>   > Uses batteries or a power supply that has a fixed voltage, and the 
>   > current in the brew cell is monitored with a digital multimeter in one 
>   > lead of the cell. For a small amount 8 to 16 ounces with two #14 silver 
>   > wires as electrode the shut-off current is between 3 to 4 ma. for larger 
>   > amounts of DW then then current must be adjusted for the increased 
>   > electrode surface area. 
>   > 
>   > CONSTANT CURRENT; 
>   > This uses a fixed power supply of 27 to 40 volts (can be higher) but in 
>   > one cell lead is placed a semiconductor unit that is wire as a constant 
>   > current source. This reduces the cell voltage by limiting the cell 
>   > current until the current reachs the set limiting value. At that point 
>   > the current stays constant. 
>   > 
>   > In both systems constant stirring has been proven and has now been added 
>   > to all of the commercial units. Bubbling of air through the CS does not 
>   > supply the velocity between the electrodes to stop agglomeration of the 
>   > silver particles. This can de demonstrated with the laser pointer. It 
>   > shows up in the brightness of the Tyndall beam. The brighter the beam 
>   > the larger the particles and we do notwant that. In fact the very best 
>   > CS will have no T.E. 
>   > 
>   > I hope this help answer your questions. If you have more send them. Also 
>   > visit the archives for aditional info. 
>   > 
>   > I appreciate Dr. Jon's input even if it is antiquated. It is making more 
>   > people aware of CS. Remember he is an M.D. and so wemust allow him some 
>   > leaway :-) 
>   > 
>   > "Ole Bob: 
>   > 
>   > -- 
>   > The silver-list is a moderated forum for discussion of colloidal silver. 
>   > 
>   > To join or quit silver-list or silver-digest send an e-mail message to: 
>   > [email protected] -or- [email protected] 
>   > with the word subscribe or unsubscribe in the SUBJECT line. 
>   > 
>   > To post, address your message to: [email protected] 
>   > Silver-list archive: http://escribe.com/health/thesilverlist/index.html 
>   > List maintainer: Mike Devour 
>   > 
>   > _________________________________________________________________ 
>   > Get your FREE download of MSN Explorer at http://explorer.msn.com 
> 
> 
> ------------------------------------------------------------------------------
>   Get your FREE download of MSN Explorer at http://explorer.msn.com
> 
> 


>** --------- End Original Message ----------- **

>