Hi Langsley,

You have just stepped into a hornet's nest!!! The people on this list cannot
agree as to which is best, ionic silver or particle silver.

Technically speaking only colloidal silver must be made up of particles of
silver (Ag0). However since one cannot change common usage of the word
colloid to most people it is a mixture of ionic (Ag+) and particles (Ag0).
Please note that ionic (Ag+) is water soluable or is in solution.

The standard methods used to measure PPM is either the electron specific
electrode system or the spectrophotometer. One can also have an AA(atomic
adsorption) test made. The first two measure only the ionic portion. If the
colloid is pure metal particles then it will have very little or no
conductiviety . It should only be that of the distilled water.

The DC process produces a mixture of both ions and particles. The tyndall
effect that one sees when shinning a laser pointer through the liquid
indicates only particles.

Speaking for the HVAC ARC process it produces nearly 100% ionic silver. (No
T.E. even in the dark) The T.E. M. that I have had made for my process shows
"particles" in the 1 to2 nm and 6 to 8 nm. An nm is .001micron.

I have made over 400 tests using almost every type of protocol imaginable,
all data logged and plotted. I have  my own spectrophotometer so I know what
I am producing.  AS TO WHICH IS BEST ?????  Only God knows and He isn't
talking right now.

Having looked at 12 vdc to 380 vdc and 780 vac to 15,000 vac from my
engineering background I have settled on the HVAC ARC with CO2 gas blanket.
The CS it produces works for me and my friends.

I hope this will help, if not contact me off list.

"Ole Bob"




--
The silver-list is a moderated forum for discussion of colloidal silver.

To join or quit silver-list or silver-digest send an e-mail message to: 
[email protected]  -or-  [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.

To post, address your message to: [email protected]
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <[email protected]>