I was stirring with a shaped pure silver rod coupled to a little electric motor. I am not sure about the time, I think it was around 1.5 h or 2 h. there was 0.72 L DW.
Thank you. Satchid -----Original Message----- From: Kevin Nolan [mailto:[email protected]] Sent: zaterdag 23 februari 2002 6:06 To: [email protected] Subject: Re: CS>Question Satchid - it would be helpful if you included the timespan involved and whether stirring was used. Kevin Nolan ----- Original Message ----- From: "Satchid" <[email protected]> To: <[email protected]> Sent: Thursday, February 21, 2002 10:22 PM Subject: CS>Question > a question: > > I make colloidal silver starting with pure distilled water and two pure > silver electrodes with a home made CS generator (polarity switching every 60 > sec) starting at 80 V dc and after reaching the maximum constant current of > 2 mA per square inch the voltage drops slowly to 15 V. I do have almost no > TD. Can something else being made other then CS? Or can something else make > the water resistance lower? > > What would your guess be of the ppm. (2 electrodes 2.5 mm diameter end 100 > mm wetted length. > > Satchid > > > -- > The silver-list is a moderated forum for discussion of colloidal silver. > > To join or quit silver-list or silver-digest send an e-mail message to: > [email protected] -or- [email protected] > with the word subscribe or unsubscribe in the SUBJECT line. > > To post, address your message to: [email protected] > Silver-list archive: http://escribe.com/health/thesilverlist/index.html > List maintainer: Mike Devour <[email protected]> >
