Greetings EIS'ers, Until you have had the ULVDC CS checked with a spectrophotometer or an ISE system you have no idea what is the PPM !!!!!! The correction factor can be anywhere from 1.1 to 2.
This process is really an ultra low current density on the anode, so the system voltage can be adjusted to compensate for larger volumes of water. With two gallons of DW and a 5" x 8" anode when the current reaches 12.6 ma the supply voltage is 33.7 volts. The current density is .0126 amps / 40 SQ IN = 3.15^-04 amps/ sqin. or 31.5 mirco amps. in 3.8 hours the PPM = 39.6 Actual, and the conductance is 48.6, so the ratio is checked with a PWT would be 48.6/39.6 = 1.2. "Ole Bob" -- The silver-list is a moderated forum for discussion of colloidal silver. Instructions for unsubscribing may be found at: http://silverlist.org To post, address your message to: [email protected] Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <[email protected]>
