Hi Mike, I am attaching a Wplot32 file "5x8 repro" You can open it with any writing program.
The first series of numbers is for conductance, the second is for cell current, and the third is the cell voltage. The integral of the current curve from 0 to 3.6 hr is 23.6405 ma-hrs. The voltage is about constant 35 volts. If you plot the current curve you will not that there is a 48 hour break at the 3 hour point. Wplot32.exe does all kinds of transformations! Your statement that you can feel the difference on the teeth sounds suspiciously like the presence of NO3 in your product. Have you checked it? When the actual conductance gets too far removed from the actual AG+ PPM then the pH is low and NO3 or NO is being generated. My TEM sample had 10 ppm and 12 uS/cm conductance. Every run I make I have the acutal conductance, the actual ppm, the pH , the NO3 and is applicable the NO. I have data plotted over 500 individal runs. I try every protocol someone generates. I need to get your exact specs. and duplicate your process. "Ole Bob" -- The silver-list is a moderated forum for discussion of colloidal silver. Instructions for unsubscribing may be found at: http://silverlist.org To post, address your message to: [email protected] Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <[email protected]>
