Great stuff!! ----- Original Message ----- From: "David Bearrow" <[email protected]> To: <[email protected]> Sent: Tuesday, August 19, 2003 1:39 PM Subject: Re: CS>proxy brushing
> I've been brushing with a toothpaste I made with colloidal silver as one of > the ingredients for 2 years and my teeth have not turned black. In fact > since I started doing it the lady who cleans my teeth every 6 months has > remarked that I'm doing a better job. > > At 09:58 AM 8/18/03, you wrote: > >Is there any chance that the CS could cause blackening of teeth/ > > > >Thanks! > > > >----- Original Message ----- > >From: "sol" <[email protected]> > >To: <[email protected]> > >Sent: Saturday, August 16, 2003 5:36 PM > >Subject: Re: CS>proxy brushing > > > > > > > Reid, > > > I'd just use the CS with some H202. I use about 1 to 2 tsps of H202 > > > for about 20 oz of CS. Rinse and swish the Cs as long as I can stand > > > to hold it in my mouth, at least a couple minutes. This worked on my > > > receded gums and tartar build up much better than the straight CS. I > > > get the gum pockets measured again in Oct, but from the way my teeth > > > feel, they should be much better. Add DMSO if you like, but I don't > > > see the E and aloe vera adding anything useful, in fact, just my > > > opinion, it seems like they would make the whole thing less effective. > > > My CS is about 10 to 18 ppm, depending on which gen I use to make > > > it. The larger/more particulate CS (judged by color, TE and PWT) > > > wasn't being effective against the mouth bacteria, as judged by tartar > > > build up. I've been unable to consistently make clear CS, so just > > > started using the H202, and have found it puts the CS back to clear, > > > increases ppm (just as I was told it would) and, for me, makes it much > > > more effective. I still spray my eyes with it, too, and it doesn't > > > sting or anything. > > > paula > > > ----- Original Message ----- > > > From: "Reid Harvey" <[email protected]> > > > > > > > Greetings Friends, > > > but I'm also pushing in a > > > > mix of CS, DMSO, E and aloe vera. One problem I have is that I'm > > > not > > > > sure the CS I'm using is doing the job, a couple of drops of > > > Microdyn, > > > > large particle size. The ointment may be something like a couple of > > > > hundred ppm. But I do know that the 10 ppm CS is of the smaller > > > > particle size that can better penetrate the tissue. So What to do? > > > > > > > > > > > > > > > > > > -- > > > The silver-list is a moderated forum for discussion of colloidal silver. > > > > > > Instructions for unsubscribing may be found at: http://silverlist.org > > > > > > To post, address your message to: [email protected] > > > > > > Silver-list archive: http://escribe.com/health/thesilverlist/index.html > > > > > > List maintainer: Mike Devour <[email protected]> > > > > >
