Mike M.. To do this anode weight experiment is not as easy as putting it on paper!!
I ran 2 gallons, Initial Ci = 7.1 uS/cm using the large anode which I weighed before run and did not touch the scale adjustment. Brewed 3.5 hours without current limit; pH =6.98; and Ag+ =13.6 ppm, and there was no change in the weight of the anode. I guess the initial weight of 126.9 gm was too high to be able to detect the weight loss. The CS T.E. could only be seen in a dark room and almost no sparkles...very good stuff. I will replace the large anode with an anode that is 1/2" x 3.5" wet and look for weight change. If I can't detect it then I will have to go an Aero Space client of mine and use their lab balance. (50 miles round trip) I have setup a current limiter at 6.3 mA and will run much longer. I have attached the Wplot data. For those who do not have the Wplot16 or 32 .exe you can open the file with the "notepad" to see the data. Observation the high initial Cf in uS/cm causes a very fast generation of CS. "Ole Bob"
4x9 AGtest.PLT
Description: application/unknown-content-type-plt_auto_file
