Ode Coyote wrote: > 'fraid it's not that simple Marshall > > The more particles you pack into a given area, the more "likely" they are to > collide and stick together. > Heat can induce too much motion into particles and force them together. [Over > around 110 deg F]
That is what I said. > > > The concentration of particles is not uniform in water unless it is well > stirred up and the rate of particle formation/ion emission is controlled, > resulting in high concentration zones, especially near the electrodes. I did leave out stirring, that does reduce particle size. > > I'm finding that controlling the build/collapse rates of the electromagnetic > field around the electrodes can control ion density zones making particle > formation and ion to particle ratios adustable. [It's being a bit tricky] > > Electrodes widely spaced increases the resistance in the water...more > resistance=less current=lower emmission rates=lower PPM for a given time span > at a given applied voltage, and time for high concentration zones to > dissipate as the process goes on if stirring is not being used. > If stirring IS being used, more current can be used and get the same result. I agree. > > > Looking at it like making rock candy might be a good analogy. > Once the saturation point of dissolved ions is reached, [13 PPM?] particles > [crystals] start to form and go into suspension. It's apparently not all that > simple either, as the saturation point doesn't appear to be 'fixed' and ionic > content can far exceed 13 PPM...but not without eventually having particles. > If there are any impurities, crystals tend to form around them and grow and > can do so below 13 PPM. > It's very easy to exceed the saturation point in localized zones and make > particles at any 'over-all' PPM. which is why you can see an "ion > cloud"...particle cloud... [ions are invisible] forming very quickly. > Once a particle forms, it generally doesn't 'un-form'. > > Somewhere around 20 PPM agglomeration of particles gets "iffy" no matter how > the setup works. > > So, using very pure water allows high particle counts with a small size. > The contaminants don't have to be 'dissolved' contaminants [registering on a > meter] to have an effect. > In fact, a piece of copper [wire] dropped into a batch of CS will become > coated with a frothy structure of silver oxides and remove color and many > particles from a batch of yellow CS reducing both TE and conductivity. This will introduce copper into the batch. > > > If well done with ions and particles well disbursed, the CS "usually" > stabilizes and stays clear and develops a pretty strong TE up to around 20 > PPM. > Beyond that, [30 - 100 PPM?] there are so many particles that the water can > look grey. [If they didn't agglomerate into the yellow range] > If left alone... in cool water, the larger ones stratify towards the bottom. > If there are distinct differences between particle sizes still within the > colorless range [vs a broad even distribution of sizes within that range] you > may actually see a 'banding' effect rather than a gradual difference in the > intensity with the smaller ones that don't block as much light being at the > top. [As viewed in a sunbeam or with a strong bright flashlight] > > BTW White LED flashlights work great. > > Various trace elements in the water can act as a catalyst to form larger > crystals. [and they don't have to be "dissolved ionic" contaminants to do > that] > Others can break large crystals apart. > > Hydrogen peroxide is a strange one. [as is copper, in a different way] > > Placing a blackened electrode in H2O2 will clean it up pretty fast, but if > you 'leave' that same electrode in the H2O2, it will turn black again. > > If you add a few drops of H2O2 to a colored batch, the color goes away and TE > quality changes.[as seen with a laser] giving one the over all impression > that the particle sizes have decreased. > Might well be so. > > But, if you run current through that water containing H2O2, very large shiny > metal snowflakes will form. > > Copper apparently attracts dissolved oxygen and acts as a catalyst to form > silver oxides out of both particles and ions with a possible preference > toward using up particles. [Possibly because ions and small particles tend to > hang around towards the top] > If the copper is in the bottom of the container where the larger particles > and "sparklies" [if any] tend to stratify in still water, they will be > removed and stick to the copper forming an oxide structure. > > "Sparklies" are partly pollen and dust etc...and... partly [or mostly] 'plate > out' particles and oxide particles that have fallen off the electrodes. If > it's electrode gunk they are big and heavy enough to go straight to the > bottom after a day or so and pretty much stay there while you pour the top > portion off. > Most are still too small to be filtered out without using a very good filter. > [and probably too big and/or chemically inert to be assimilated] This is true. Marshall > > > Ode > > At 09:41 AM 3/12/2004 -0500, you wrote: > >>>> > > You will likely find that the size of the particles is more dependent on > the quality of the water than the generator design. There are some > differences as to the size and spacing of the electrodes, and if the water is > stirred or not. Basically the cooler the water, the lower the current, the > purer the water and the wider the electrodes, the smaller the particles for a > low voltage DC system. > > Marshall > > "[email protected]" wrote: > > Hi, > > Can anyone explain the difference between the size of the colloidal > silver particles? One company will advertise one way and another company will > advertise another way. > > Apparently the smaller the silver particles, the more beneficial? > > If this is the case, can anyone say with authority which company > sells a generator that produces the smallest particles of colloidal silver? > > Thank you, > > Jean Baugh > > <<<< > > -- The Silver List is a moderated forum for discussing Colloidal Silver. > Instructions for unsubscribing are posted at: http://silverlist.org > To post, address your message to: [email protected] Silver List archive: > http://escribe.com/health/thesilverlist/index.html > Address Off-Topic messages to: [email protected] OT Archive: > http://escribe.com/health/silverofftopiclist/index.html > List maintainer: Mike Devour -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: [email protected] Silver List archive: http://escribe.com/health/thesilverlist/index.html Address Off-Topic messages to: [email protected] OT Archive: http://escribe.com/health/silverofftopiclist/index.html List maintainer: Mike Devour <[email protected]>

