Re: CS>H2O2 and CS
From: Jason
Date: Tue, 9 Nov 2004 14:33:41
http://escribe.com/health/thesilverlist/m74904.html
> Hi Mike:
Hi Jason - good to hear from you. Why won't you let me join your
Yahoo group? I requested some time ago and have not received a
reply.
> I enjoy reading your great posts.
Flattery is a good start. Can you get Robert to review my analysis
of the cs process? After some 7 years, 74,000 posts in the Silver
List, and endless grief and argumenta, someone finally figured out
how silver electrolysis works. I'd appreciate your comments also:
http://escribe.com/health/thesilverlist/m74754.html
Notice that argumenta is Latin for permanent argument:)
> However, there is one other significant problem to throw a monkey
> wrench in the equations: Nitrogen.
> Even if a distilled water is "nitrogen free", as soon as the
> distilled water is subject to open air, small amounts of nitrogen
> are adsorbed into the water.
No concern at low voltage.
> This may be one reason why the Faraday Equation calculation for CS
> production is not reliable.
That is not true. If you have a problem, it is probably
instrumentation. I can help you solve it.
> "'Ole" Bob (http://www. hvacsilver.com), a list member on another
> list, and I spent a considerable amount of time analysing various
> batches of silver, utilizing DC and HVAC, testing Faraday's
> equation. In some cases, the results were close. In others, the
> measured results were off by more than 30%.
Again, your instrumentation can be the source of error. I have no
such problems. Current and time are well defined. Volume not so well.
> Now, Ole Bob uses a spectrophotometer to analyze silver content,
> and this is not the most ideal analytical method to use, but the
> discrepancies Bob documented on numerous occasion have also --
> although not as frequently -- been demonstrated on batches from
> analytical laboratories as well.
Not related to the current topic. As you know, labs are often off by
several orders of magnitude. A few dozen percent error is nothing to
write home about.
However, as I mentioned, I am an instrumentation expert. That is my
profession, and I have a number of patents that advanced the state
of the art in many areas. You can check me out at
http://www3.sympatico.ca/add.automation/
> I know CS producers who have spent a lot of time and energy
> attempting to eliminate the nitrogen variable from the CS
> production process.
Why. CO2 is more of a factor, but only at about 1.5 ppm or below.
See Ivan's work referenced in my previous posts.
> Nitrogen can really mess with the production; more so with HVAC
> methods than with low current DC systems, but the variable is
> still present.
As you state, it is of no concern at low voltage.
> Kind Regards,
> Jason
Let me know if I can qualify to join your Yahoo group.
Best Wishes,
Mike Monett
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Instructions for unsubscribing are posted at: http://silverlist.org
To post, address your message to: [email protected]
Silver List archive: http://escribe.com/health/thesilverlist/index.html
Address Off-Topic messages to: [email protected]
OT Archive: http://escribe.com/health/silverofftopiclist/index.html
List maintainer: Mike Devour <[email protected]>
