At 12:58 AM 03/03/05, you wrote:
D
I had computed about 20 ppm per hour for 20 mA into a gallon. That works
out to be almost exactly the same.
That is the big question. When I ran this over the weekend, I ended up
with a good bit of black fluffy stuff that fell off the wires. I am sure
that some current was wasted on making this, but how much is anyones guess.
Marshall
Hi folks,
I run a simple system based on transformed 6vDC 300ma output into 1.5
litres of vacuum distilled water at mean ambient temp of 26C and agitated
by a fishtank bubbler ( the solution not me!) for between 8-10 hours.
Starting tyndall is minuscule spotty to clear. Almost no difference
between 8 & 10 hours with a well defined tyndall.
The source is a pair of Canadian 9999 Maple Leaf bullion/coins submerged
50% in the solution.
These are spaced about 40mm apart.
End of run there is a well-defined black sludge on the positive side,
easily removed with a stiff cloth.
PPM? Never tested analytically/maths or machine, but:
TESTING
On in vivo tests, results are a bit amazing and I try hard to avoid the
placebo effect with subjects.
We all now know the raw milk protocol.
Try the deodorant protocol - methodology obvious.
Meat-eaters: as a mouthwash. But you do still smell funny to a vegetarian! :-)
Burns.
Amazing with DMSO on Shingles. ( But DMSO on its own applied to the
head/temples carefully to avoid the eyes is marvellous with migraines ....
3 subject results) ????
Migraines are easy then to track to their (usually, beloved food source).
If only I'd known about Cs 20 years ago! Or 5!
Cheers,
Himagain
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Instructions for unsubscribing are posted at: http://silverlist.org
To post, address your message to: [email protected]
Silver List archive: http://escribe.com/health/thesilverlist/index.html
Address Off-Topic messages to: [email protected]
OT Archive: http://escribe.com/health/silverofftopiclist/index.html
List maintainer: Mike Devour <[email protected]>
