In normal operation, if the green light was coming on after only 2-5
minutes, the water was NOT very good quality. Acceptable perhaps, as the
green light did not come on immediately, however certainly not good, in
my opinion.
You didn't say what size batch you are making, but what happens with my
SG-6 and a quart batch, with very pure distilled water (.4uS or less)
and no previous CS added is that it takes from 50min to over an hour for
the green light to come on. Unless your green light has not come on
after an hour and 15 min or a bit more, and if you are making a quart
batch, there is nothing wrong---you just have very, very pure distilled
water.
sol
[email protected] wrote:
Haven't made any batches of CS since summer started and am having
problems and need some advice.
When I made previous batches, the green light came on after about 2-5
minutes, and the batch was ready after about 20 minutes.
This what is happening now is the green light isn't coming on at all
even after 30 or 40 minutes.
Am using Walgreens distilled water. Is it the water? Is it my SG6
unit? When not using the device it's stored in a cabinet to keep dust
off of it.
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Instructions for unsubscribing are posted at: http://silverlist.org
To post, address your message to: [email protected]
Silver List archive: http://escribe.com/health/thesilverlist/index.html
Address Off-Topic messages to: [email protected]
OT Archive: http://escribe.com/health/silverofftopiclist/index.html
List maintainer: Mike Devour <[email protected]>
