wow. Why the brass plate. Why wouldn't the paper towel contaminate the solution.
HRBE <[email protected]> wrote: I have been doing some experimenting with making bulk CS. I have come up with the following setup. 1 x 5 gallon (imperial) fish tank 1 x 36 square inches 99.99% silver plate 1 x 36 square inches brass plate. 1 x aquarium water pump 1 x 30volt DC power supply, with adjustable current regulation. I spaced the plates @ 3 inches, I wrapped the brass plate in paper towel to prevent the gunge from being circulated in the water. I limited the current to 100ma. By wrapping the brass plate in paper towelling I don't need to wipe the plate clean. 8 hours later, I have 5 gals of perfectly clear CS solution, which reads 25uS on my Hanna HI98308 TDS meter. I used current control because I didn't have the time to "babysit" the process I used Bob Berger's book as a guide for construction and I am building 45 volt dc current regulated power supply to try to shorten the brew process time. Hope this is of interest to the group John McLean Australia -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: [email protected] Address Off-Topic messages to: [email protected] The Silver List and Off Topic List archives are currently down... List maintainer: Mike Devour Carol Ann _______________________________ The Pessimist complains about the Wind; The Optimist expects it to change; The Realist adjusts the Sails. - The world needs more sailors. --------------------------------- Yahoo! Messenger with Voice. PC-to-Phone calls for ridiculously low rates.
