"Rowena" <[email protected]> wrote:

  > Well, seeing  we  are  still thinking  about  laundry  and killing
  > little creatures, I will chime in too.

  > Firstly, from  schooldays,  I recall Willy  Kitch,  otherwise Miss
  > Averilda Williams who taught Domestic Science, drumming it into us
  > that we should iron stuff to kill germs.

  > Second, the  friend   who   recommended   using  meths  instead of
  > conditioner also  said she hangs washing out, brings it  in, irons
  > it and hangs it out again.

  > Rather too  much handling for me, but I did  discover  that modern
  > washing machines  seem to spin things well enough to  put  them on
  > the ironing board straight away. This was particularly useful when
  > I had two years in Wet Wales, and my first Really Good  Spinner on
  > a front loader. I could take the washing to the  upstairs landing,
  > iron it, then spread it on racks overhanging the  stairwell, where
  > warm air from downstairs finished off the job started by the iron.
  > I felt the benefit was firstly the sanitising action of the steam,
  > lots of steam, and secondly the reduced drying time of  partly dry
  > washing. Plus  there  was no beating the results  from  ironing so
  > damp, and  the  luxury of having even  my  teatowels  ironed! Ooh,
  > simple pleasures!

  > The information  about mold on cotton fluff is  very  sobering and
  > good to  know about. If the washing can't go out  into  the Aussie
  > sunshine here,  I hang it on little lines slung here and  there in
  > my laundry, or iron and hang on hangers, or a mixture  of methods,
  > but sometimes use the dryer. Having bought a dryer that  sends the
  > hot air out through a grill in the door, I thought I was  well off
  > in that  it  was  so easy to remove the fluff  every  time.  Now I
  > wonder where else the lint might be collecting. And oh, dear!

  > Where is  the stuff that escapes the filter? All over  the dampest
  > room in the house!

  > R

  Hi Rowena,

  Thanks for  the post. I am alarmed that someone would  make  a dryer
  that ventilates  indoors. As you point out, not only  is  it spewing
  lint that  gets  past the filter (lots of it!),  it  is  dumping the
  humidity from  the clothes indoors. So you are  providing  the ideal
  conditions for mold growth: food and water. That is very bad news.

  If I were living nearby, I could go to the nearest  appliance store,
  do a  little social engineering so they wouldn't mind if  I  took an
  old dryer, bring it home and clean it, and give it to you to replace
  the one you bought.

  OTOH, I wonder if your dryer might have another exhaust vent  in the
  back, so  you could hook it to an external outlet. If  you  post the
  make and  model, maybe I can find it in the  appliance  repair sites
  and see how it is made inside.

Best Wishes,

Mike M


--
The Silver List is a moderated forum for discussing Colloidal Silver.

Instructions for unsubscribing are posted at: http://silverlist.org

To post, address your message to: [email protected]

Address Off-Topic messages to: [email protected]

The Silver List and Off Topic List archives are currently down...

List maintainer: Mike Devour <[email protected]>